1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
oa
A cascaded model of spectral distortions due to spectral response effects and pulse pileup effects in a photon-counting x-ray detector for CT
Rent:
Rent this article for
Access full text Article
/content/aapm/journal/medphys/41/4/10.1118/1.4866890
1.
1. R. E. Alvarez and A. Macovski, “Energy-selective reconstructions in X-ray computerised tomography,” Phys. Med. Biol. 21(5), 733744 (1976).
http://dx.doi.org/10.1088/0031-9155/21/5/002
2.
2. T. G. Flohr et al., “First performance evaluation of a dual-source CT (DSCT) system,” Eur. Radiol. 16(2), 256268 (2005).
http://dx.doi.org/10.1007/s00330-005-2919-2
3.
3. T. G. Flohr, H. Bruder, K. Stierstorfer, M. Petersilka, B. Schmidt, and C. H. McCollough, “Image reconstruction and image quality evaluation for a dual source CT scanner,” Med. Phys. 35(12), 58825897 (2008).
http://dx.doi.org/10.1118/1.3020756
4.
4. Y. Zou and M. D. Silver, “Analysis of fast kV-switching in dual energy CT using a pre-reconstruction decomposition technique,” Proc. SPIE 6913, 691313 (2008).
http://dx.doi.org/10.1117/12.772826
5.
5. S. Feuerlein et al., “Multienergy photon-counting K-edge imaging: Potential for improved luminal depiction in vascular imaging,” Radiology 249(3), 10101016 (2008).
http://dx.doi.org/10.1148/radiol.2492080560
6.
6. D. Pan et al., “Computed tomography in color: NanoK-enhanced spectral CT molecular imaging,” Angew. Chem., Int. Ed. Engl. 49(50), 96359639 (2010).
http://dx.doi.org/10.1002/anie.201005657
7.
7. K. Taguchi et al., “Modeling the performance of a photon counting x-ray detector for CT: Energy response and pulse pileup effects,” Med. Phys. 38(2), 10891102 (2011).
http://dx.doi.org/10.1118/1.3539602
8.
8. J. Cammin, J. S. Iwanczyk, and K. Taguchi, “Chapter 2: Spectral/photon-counting computed tomography,” in Emerging Imaging Technologies in Medicine, 1st ed., edited by M. A. Anastasio and P. L. Riviere (CRC Press, Boca Raton, FL, 2013).
9.
9. G. F. Knoll, Radiation Detection and Measurement, 4th ed. (Wiley, Hoboken, NJ, 2010).
10.
10. K. Taguchi, E. C. Frey, X. Wang, J. S. Iwanczyk, and W. C. Barber, “An analytical model of the effects of pulse pileup on the energy spectrum recorded by energy resolved photon counting x-ray detectors,” Med. Phys. 37(8), 39573969 (2010).
http://dx.doi.org/10.1118/1.3429056
11.
11. D. Vartsky et al., “Radiation induced polarization in CdTe detectors,” Nucl. Instrum. Methods Phys. Res. A 263(2–3), 457462 (1988).
http://dx.doi.org/10.1016/0168-9002(88)90986-2
12.
12. A. Jahnke and R. Matz, “Signal formation and decay in CdTe x-ray detectors under intense irradiation,” Med. Phys. 26(1), 3848 (1999).
http://dx.doi.org/10.1118/1.598475
13.
13. D. S. Bale and C. Szeles, “Nature of polarization in wide-bandgap semiconductor detectors under high-flux irradiation: Application to semi-insulating Cd1−xZnxTe,” Phys. Rev. B 77(3), 035205 (2008).
http://dx.doi.org/10.1103/PhysRevB.77.035205
14.
14. S. Del Sordo, L. Abbene, E. Caroli, A. M. Mancini, A. Zappettini, and P. Ubertini, “Progress in the development of CdTe and CdZnTe semiconductor radiation detectors for astrophysical and medical applications,” Sensors 9(5), 34913526 (2009).
http://dx.doi.org/10.3390/s90503491
15.
15. J. Cammin et al., “Compensation of nonlinear distortions in photon-counting spectral CT: Deadtime loss, spectral response, and beam hardening effects,” Proc. SPIE 8313, 83131T (2012).
http://dx.doi.org/10.1117/12.911217
16.
16. D. Vavrik and J. Jakubek, “Material analysis using characteristic transmission spectra,” in IEEE Nuclear Science Symposium Conference Record 2008 NSS 08, Dresden, Germany (IEEE, 2008), pp. 24522455.
17.
17. D. Vavrik and J. Jakubek, “Radiogram enhancement and linearization using the beam hardening correction method,” Nucl. Instrum. Methods Phys. Res. A 607(1), 212214 (2009).
http://dx.doi.org/10.1016/j.nima.2009.03.156
18.
18. H. Ding and S. Molloi, “Image-based spectral distortion correction for photon-counting x-ray detectors,” Med. Phys. 39(4), 18641876 (2012).
http://dx.doi.org/10.1118/1.3693056
19.
19. S. Srivastava, J. Cammin, G. S. K. Fung, B. M. W. Tsui, and K. Taguchi, “Spectral response compensation for photon-counting clinical x-ray CT using sinogram restoration,” Proc. SPIE 8313, 831311 (2012).
http://dx.doi.org/10.1117/12.911394
20.
20. S. Srivastava and K. Taguchi, “Sinogram restoration algorithm for photon counting clinical X-ray CT with pulse pileup compensation,” in Proceedings of the First International Conference on Image Formation in X-Ray Computed Tomography, Salt Lake City, UT, 2010 (2010), pp. 59.
21.
21. J. P. Schlomka et al., “Experimental feasibility of multi-energy photon-counting K-edge imaging in pre-clinical computed tomography,” Phys. Med. Biol. 53(15), 40314047 (2008).
http://dx.doi.org/10.1088/0031-9155/53/15/002
22.
22. E. N. Gimenez et al., “Characterization of Medipix3 with synchrotron radiation,” IEEE Trans. Nucl. Sci. 58(1), 323332 (2011).
http://dx.doi.org/10.1109/TNS.2010.2089062
23.
23. E. Roessl, H. Daerr, K. J. Engel, A. Thran, C. Schirra, and R. Proksa, “Combined effects of pulse pile-up and energy response in energy-resolved, photon-counting computed tomography,” in 2011 IEEE Nuclear Science Symposium Medical Imaging Conference NSS/MIC, Valencia, Spain, 2011 (IEEE, 2011), pp. 23092313.
24.
24. P. M. Shikhaliev, S. G. Fritz, and J. W. Chapman, “Photon counting multienergy x-ray imaging: Effect of the characteristic x rays on detector performance,” Med. Phys. 36(11), 51075119 (2009).
http://dx.doi.org/10.1118/1.3245875
25.
25. R. Akbarpour, S. N. Friedman, J. H. Siewerdsen, J. D. Neary, and I. A. Cunningham, “Signal and noise transfer in spatiotemporal quantum-based imaging systems,” J. Opt. Soc. Am. 24(12), B151B164 (2007).
http://dx.doi.org/10.1364/JOSAA.24.00B151
26.
26. L. Wielopolski and R. P. Gardner, “Prediction of the pulse-height spectral distribution caused by the peak pile-up effect,” Nucl. Instrum. Methods Phys. Res. 133, 303309 (1976).
http://dx.doi.org/10.1016/0029-554X(76)90623-6
27.
27. P. C. Johns and M. J. Yaffe, “Correction of pulse-height spectra for peak pileup effects using periodic and random pulse generators,” Nucl. Instrum. Methods Phys. Res. A 255(3), 559581 (1987).
http://dx.doi.org/10.1016/0168-9002(87)91227-7
28.
28. N. P. Barradas and M. A. Reis, “Accurate calculation of pileup effects in PIXE spectra from first principles,” X-Ray Spectrom. 35(4), 232237 (2006).
http://dx.doi.org/10.1002/xrs.903
29.
29. J. S. Iwanczyk et al., “Photon counting energy dispersive detector arrays for x-ray imaging,” IEEE Trans. Nucl. Sci. 56(3), 535542 (2009).
http://dx.doi.org/10.1109/TNS.2009.2013709
30.
30. W. C. Barber et al., “Characterization of a novel photon counting detector for clinical CT: Count rate, energy resolution, and noise performance,” Proc. SPIE 7258, 725824725829 (2009).
http://dx.doi.org/10.1117/12.813915
31.
31. J. M. Boone and J. A. Seibert, “An accurate method for computer-generating tungsten anode x-ray spectra from 30 to 140 kV,” Med. Phys. 24(11), 16611670 (1997).
http://dx.doi.org/10.1118/1.597953
32.
32. T. Schoonjans et al., “The xraylib library for X-ray–matter interactions: Recent developments,” Spectrochim. Acta, Part B 66(11–12), 776784 (2011).
http://dx.doi.org/10.1016/j.sab.2011.09.011
33.
33. K. Cranley, B. J. Gilmore, G. W. A. Fogarty, L. Desponds, and D. Sutton, “Catalogue of diagnostic x-ray spectra & other data,” Report No. 78 (Institution of Physics and Engineering in Medicine (IPEM), 2006).
34.
34. G. Poludniowski, G. Landry, F. DeBlois, P. M. Evans, and F. Verhaegen, “SpekCalc: A program to calculate photon spectra from tungsten anode x-ray tubes,” Phys. Med. Biol. 54(19), N433N438 (2009).
http://dx.doi.org/10.1088/0031-9155/54/19/N01
http://aip.metastore.ingenta.com/content/aapm/journal/medphys/41/4/10.1118/1.4866890
Loading
/content/aapm/journal/medphys/41/4/10.1118/1.4866890
Loading

Data & Media loading...

Loading

Article metrics loading...

/content/aapm/journal/medphys/41/4/10.1118/1.4866890
2014-03-11
2014-12-28

Abstract

Energy discriminating, photon-counting detectors (PCDs) are an emerging technology for computed tomography (CT) with various potential benefits for clinical CT. The photon energies measured by PCDs can be distorted due to the interactions of a photon with the detector and the interaction of multiple coincident photons. These effects result in distorted recorded x-ray spectra which may lead to artifacts in reconstructed CT images and inaccuracies in tissue identification. Model-based compensation techniques have the potential to account for the distortion effects. This approach requires only a small number of parameters and is applicable to a wide range of spectra and count rates, but it needs an accurate model of the spectral distortions occurring in PCDs. The purpose of this study was to develop a model of those spectral distortions and to evaluate the model using a PCD (model DXMCT-1; DxRay, Inc., Northridge, CA) and various x-ray spectra in a wide range of count rates.

The authors hypothesize that the complex phenomena of spectral distortions can be modeled by: (1) separating them into count-rate independent factors that we call the spectral response effects (SRE), and count-rate dependent factors that we call the pulse pileup effects (PPE), (2) developing separate models for SRE and PPE, and (3) cascading the SRE and PPE models into a combined SRE+PPE model that describes PCD distortions at both low and high count rates. The SRE model describes the probability distribution of the recorded spectrum, with a photo peak and a continuum tail, given the incident photon energy. Model parameters were obtained from calibration measurements with three radioisotopes and then interpolated linearly for other energies. The PPE model used was developed in the authors’ previous work [K. Taguchi et al. , “Modeling the performance of a photon counting x-ray detector for CT: Energy response and pulse pileup effects,” Med. Phys.38(2), 1089–1102 (2011)]. The agreement between the x-ray spectra calculated by the cascaded SRE+PPE model and the measured spectra was evaluated for various levels of deadtime loss ratios (DLR) and incident spectral shapes, realized using different attenuators, in terms of the weighted coefficient of variation (COV), i.e., the root mean square difference weighted by the statistical errors of the data and divided by the mean.

At low count rates, when DLR < 10%, the distorted spectra measured by the DXMCT-1 were in agreement with those calculated by SRE only, with COV's less than 4%. At higher count rates, the measured spectra were also in agreement with the ones calculated by the cascaded SRE+PPE model; with PMMA as attenuator, COV was 5.6% at a DLR of 22% and as small as 6.7% for a DLR as high as 55%.

The x-ray spectra calculated by the proposed model agreed with the measured spectra over a wide range of count rates and spectral shapes. The SRE model predicted the distorted, recorded spectra with low count rates over various types and thicknesses of attenuators. The study also validated the hypothesis that the complex spectral distortions in a PCD can be adequately modeled by cascading the count-rate independent SRE and the count-rate dependent PPE.

Loading

Full text loading...

/deliver/fulltext/aapm/journal/medphys/41/4/1.4866890.html;jsessionid=a7ioqbssrgmih.x-aip-live-03?itemId=/content/aapm/journal/medphys/41/4/10.1118/1.4866890&mimeType=html&fmt=ahah&containerItemId=content/aapm/journal/medphys
true
true
This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: A cascaded model of spectral distortions due to spectral response effects and pulse pileup effects in a photon-counting x-ray detector for CT
http://aip.metastore.ingenta.com/content/aapm/journal/medphys/41/4/10.1118/1.4866890
10.1118/1.4866890
SEARCH_EXPAND_ITEM