No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
On chip complex signal processing devices using coupled phononic crystal slab resonators and waveguides
2. E. R. Brown, “RF-MEMS switches for reconfigurable integrated circuits,” IEEE Transactions on Microwave Theory and Techniques 46, 1868, (1998).
4. C. T.-C. Nguyen, L. P. B. Katehi, and G. M. Rebeiz, “Micromachined devices for wireless communications,” Proceedings of the IEEE 86, 1756 (1998).
7. S. Mohammadi, A. A. Eftekhar, A. Khelif, H. Moubchir, R. Westafer, W. D. Hunt, A. Adibi, “Complete phononic bandgaps and bandgap maps in two-dimensional silicon phononic crystal plates,” Electronic Letters 43, 898 (2007).
8. S. Mohammadi, A. A. Eftekhar, A. Khelif, W. D. Hunt, and A. Adibi, “Evidence of large high-frequency complete phononic band gaps in silicon phononic crystal plates,” Applied Physics Letters 92, 2219051 (2008).
9. Y. M. Soliman, M. F. Su, Z. C. Leseman, C. M. Reinke, I. El-Kady, and R. H. Olsson, “Phononic crystals operating in the gigahertz range with extremely wide band gaps,” Applied Physics Letters 97, 193502 (2010).
10. S. Mohammadi, A. A. Eftekhar, W. D. Hunt, and A. Adibi, “High-Q micromechanical resonators in a two-dimensional phononic crystal slab,” Applied Physics Letters 94, 51903 (2009).
11. S. Mohammadi, A. A. Eftekhar, W. D. Hunt, and A. Adibi, “Demonstration of large complete phononic band gaps and waveguiding in high-frequency silicon phononic crystal slabs,” in Proceedings of the 2008 IEEE International Frequency Control Symposium, 19-21 May 2008, pp. 768–772.
12. S. Mohammadi, A. Eftekhar, A. Khelif, and A. Adibi, “Support loss suppression in micromechanical resonators by the use of phononic band gap structures,” in Proceedings of the 2010 SPIE Photonics West, 76090W (2010).
13. A. Khelif, S. Mohammadi, A. A. Eftekhar, A. Adibi, and B. Aoubiza, “Acoustic confinement and waveguiding with a line-defect structure in phononic crystal slabs,” Journal of Applied Physics 108, 084515 (2010).
14. S. Mohammadi, A. A. Eftekhar, and A. Adibi, “Support Loss-free Micro / Nano-mechanical Resonators using Phononic Crystal Slab Waveguides,” in Proceedings of the 2010 IEEE Frequency Control Symposium, 521 (2010).
15. S. Mohammadi and A. Adibi, “Waveguide-based phononic crystal micro/nano-mechanical high-Q resonators,” Journal of Microelectromechanical Systems, DOI: 10.1109/JMEMS.2011.2174426, In Press.
16. S. Mohammadi, A. A. Eftekhar, R. Pourabolghasem, and A. Adibi, “Simultaneous high-Q confinement and selective direct piezoelectric excitation of flexural and extensional lateral vibrations in a silicon phononic crystal slab resonator,” Sensors and Actuators A: Physical 167, 524 (2011).
Article metrics loading...
In this paper, we report the evidence for the possibility of achieving complex signal processing functionalities such as multiplexing/demultiplexing at high frequencies using phononic crystal (PnC) slabs. It is shown that such functionalities can be obtained by appropriate cross-coupling of PnC resonators and waveguides. PnC waveguides and waveguide-based resonators are realized and cross-coupled through two different methods of mechanical coupling (i.e., direct coupling and side coupling). Waveguide-based PnC resonators are employed because of their high-Q, compactness, large spurious-free spectral ranges, and the possibility of better control over coupling to PnC waveguides. It is shown that by modifying the defects in the formation of the resonators, the frequency of the resonance can be tuned.
Full text loading...
Most read this month