No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Study of deposition characteristics of multi-nozzle near-field electrospinning in electric field crossover interference conditions
1.Z. H. Liu, C. T. Pan, C. Y. Su, L. W. Lin, Y. J. Chen, and J. S. Tsai, “A flexible sensing device based on a PVDF/MWCNT composite nanofiber array with an interdigital electrode,” Sensors and Actuators A: Physical 211, 78–88 (2014).
6.S. Jayaraman, V. Aravindan, P. S. Kumar, W. C. Ling, S. Ramakrishna, and S. Madhavi, “Synthesis of porous LiMn2O4 hollow nanofibers by electrospinning with extraordinary lithium storage properties,” Chemical Communications 49(59), 6677–6679 (2013).
7.B. Sun, Y. Z. Long, H. D. Zhang, M. M. Li, J. L. Duvail, X. Y. Jiang, and H. L. Yin, “Advances in three-dimensional nanofibrous macrostructures via electrospinning,” Progress in Polymer Science. (2013).
8.J. Zheng, B. Sun, Y. Z. Long, H. D. Zhang, Z. M. Zhang, Z. H. Zhang, …, and J. Y. Huang, “Fabrication of Nanofibers by Low-Voltage Near-Field Electrospinning,” Advanced Materials Research 486, 60–64 (2012).
9.L. Moroni, R. Schotel, D. Hamann, J. R. de Wijn, and C. A. van Blitterswijk, “3D Fiber-Deposited Electrospun Integrated Scaffolds Enhance Cartilage Tissue Formation,” Advanced Functional Materials 18(1), 53–60 (2008).
10.S. Cai, H. Xu, Q. Jiang, and Y. Yang, “Novel 3D Electrospun Scaffolds with Fibers Oriented Randomly and Evenly in Three Dimensions to Closely Mimic the Unique Architectures of Extracellular Matrices in Soft Tissues: Fabrication and Mechanism Study,” Langmuir 29(7), 2311–2318 (2013).
11.L. A. Bosworth, N. Alam, J. K. Wong, and S. Downes, “Investigation of 2D and 3D electrospun scaffolds intended for tendon repair,” Journal of Materials Science: Materials in Medicine 24(6), 1605–1614 (2013).
12.Y. Q. Wan, Q. Guo, and N. Pan, “Thermo-electro-hydrodynamic model for electrospinning process,” International Journal of Nonlinear Sciences and Numerical Simulation 5(1), 5–8 (2004).
Article metrics loading...
Nanostructured components have been receiving considerable attention in recent years. One advantage is the use of near-field electrospinning (NFES) in microdevice manufacture. Multi-nozzle NFES is offered as a technique to increase the high-precision production rate of components. The deposition characteristics of the multi-nozzles were observed and analyzed based on the mutual influence of the jets under varied conditions. It was discovered that the mutual distance of deposition becomes larger with increases in working distance and nozzle spacing, but the influence of voltage is not particularly apparent. This paper discusses the results and conclusions of the experimental investigation and theoretical derivation.
Full text loading...
Most read this month