No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Effects of cross-section on mechanical properties of Au nanowire
1.B. Bhushan, Handbook of Nanotechnology, 2nd ed. (Springer, Berlin, 2007), p. 113.
4.S. Vlasso, B. Polyakov, L. M. Dorogin, M. Antsov, M. Mets, M. Umalas, R. Saar, R. Lhmus, and I. Kink, Materials Chemistry and Physics 143, 1026 (2014).
8.E. Celik, I. Guven, and E. Madenci, Mechanical characterization of nanowire Using a customized Atomic Force Microscope, Indianapolis, June7-10, 2010, Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics, edited by T. Proulx, pp. 117-126.
10.A. Heidelberg, L. T. Ngo, B. Wu, M. A. Phillips, S. Sharma, T. I. Kamins, J. E. Sader, and J. J. Boland, Nano Letters 6, 1101 (2006).
22.ASM International, “Properties and Selection: Nonferrous Alloys and Special-Purpose Materials,” Metals Handbook, 10th ed. (ASM Press, Materials Park, 1990), Vol. 2, pp. 2004–2005.
23.ABAQUS/CAE. 6.12 User’s manual; 2012.
24.J. M. Gere and S. P. Timoshenko, Mechanics of Materials (PWS, Boston, 1997).
25.Q. A. Acton, PhD General Editor, Alkenes-Advances in Research and Application (Atlanta, Georgia, 2013), p. 440.
26.E. Oberg, F. D. Jones, H. L. Horton, and H. H. Ryffel, Machinery’s Handbook (Industrial press, New York, 2012), pp. 235–237.
Article metrics loading...
The aim of this paper is study of the effects of multiple cross-section of Aunanowire on mechanical properties. Different cross-section models of Aunanowires including circular, hexagonal, pentagonal and rectangular were simulated by finite element modeling using ABAQUS. In this study, the bending technique was applied so that both ends of the model were clamped with mid-span under loading condition. The cross-sections had the length of 400 nm and the diameter of 40 nm, except the circular cross-section while the rest of the cross-sections had an equivalent diameter. Von Misses stresses distribution were used to define the stress distribution in the cross-section under loading condition, and elastic deformation was analyzed by the beam theory. The results disclosed that the circular and the rectangular models had highest and lowest strengths against plastic deformation, respectively.
Full text loading...
Most read this month