Skip to main content
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
/content/aip/journal/adva/6/5/10.1063/1.4943413
1.
1.A. Boehm and I. Hahn, “Comparison of soft magnetic composites (SMCs) and electrical steel,” in IEEE EDPC Conf., Nuremberg (Germany), 15–18 October 2012, Conf. Proc.
2.
2.A. Schoppa, P. Delarbre, E. Holzmann, and M. Sigl, “Magnetic properties of soft magnetic powder composites at higher frequencies in comparison with electrical steels,” in IEEE EDPC Conf., Nuremberg (Germany), 29–30 October 2013, Conf. Proc.
3.
3.H. Shokrollahi and K. Janghorban, “Soft magnetic composite materials (SMCs),” J. of Materials Processing Technology 189, 112 (2007).
http://dx.doi.org/10.1016/j.jmatprotec.2007.02.034
4.
4.L. Hultman and O. Andersson, “Advances in SMC Technology – Materials and Applications,” in EPMA EURO PM2009, Copenhagen (Denmark), 13 October 2009, Conf. Proc.
5.
5.Q. Maurus, C. Löffler, and W. R. Canders, “New linear drive concepts by taking advantage of soft magnetic composites (SMC),” in IEEE EPE PEMC Conf., Ohrid (R. of Macedonia), 6–8 September 2010, Conf. Proc.
6.
6.C. Henaux, B. Nogarede, and D. Harribey, “A new concept of modular permanent magnet and soft magnetic compound motor dedicated to widespread application,” IEEE Trans. On Magn. 48, 2035-2043 (2012).
http://dx.doi.org/10.1109/TMAG.2011.2181530
7.
7.Y. Dou, Y. Guo, and J. Zhu, “Investigation of motor topologies for SMC application,” inIEEE ICEMS Conf., Seoul (South Korea), 8–11 October 2007, Conf. Proc., pp. 695-698.
8.
8.T. Kosaka, T. Hirose, and N. Matsui, “Brushless synchronous machines with wound-field excitation using SMC core designed for HEV Drives,” in IEEE IPEC Conf., Sapporo (Japan), 21–24 June 2010, Conf. Proc., pp. 1794-1800.
9.
9.F. Marignetti, G. Tomassi, P. Cancelliere, V. Delli Colli, R. Di Stefano, and M. Scarano, “Electromagnetic and mechanical design of a fractional-slot-windings axial-flux PM synchronous machine with soft magnetic compound stator,” in IEEE IAS Annual Meeting, Tampa (USA), 8–12 October 2006, Conf. Proc., pp. 62-69.
10.
10.M. A. Khan, P. Pillay, R. Guan, N. R. Batane, and D. J. Morrison, “Performance assessment of a PM wind generator with machined SMC cores,” in IEEE IEMDC Conf., Antalya (Turkey), 3–5 May 2007, Conf. Proc., pp. 1049-1053.
11.
11.K. G. Il, H. M. Seung, Y. S. Hak, and L. Y. Cheol, “The study on BLDC motor compressor using SMC,” in IEEE IPEMC Conf, Wuhan (China), 17–20 May 2009, Conf. Proc., pp. 1930-1933.
12.
12.J. Cros, P. Viarouge, Y. Chalifour, and J. Figueroa, “A new structure of universal motor using soft magnetic composites,” IEEE Trans. on Ind. Appl 40, 550-557 (2004).
http://dx.doi.org/10.1109/TIA.2004.824491
13.
13.W. Michaeli, C. Hopmann, and J. Fragner, “Analysis of the injection moulding process of soft magnetic plastics compounds,” in IEEE EDPC Conf., Nuremberg (Germany), 15–18 October 2012, Conf. Proc.
14.
14.L. Ferraris, P. Ferraris, E. Pošković, and A. Tenconi, “Theoretic and experimental approach to the adoption of bonded magnets in fractional machines for automotive applications,” IEEE Trans. On Ind. Electron. 59, 2309-2318 (2012).
http://dx.doi.org/10.1109/TIE.2011.2161069
15.
15.L. Ferraris, F. Franchini, E. Pošković, and A. Tenconi, “Impact of a bonded-magnet adoption on a specific fractional motor power and efficiency,” IEEE Trans. On Ind. Appl 50, 3249-3257 (2014).
http://dx.doi.org/10.1109/TIA.2014.2306978
16.
16.L. Ferraris, E. Pošković, and D. La Cascia, “Design optimization for the adoption of bonded magnets in PM BLDC motors,” in IEEE IECON Conf., Dallas (USA), 29 October –1 November 2014, Conf. Proc., pp. 476-482.
17.
17.L. Ferraris and E. Pošković, “Bonded magnets for brushless fractional machines: Process parameters effects evaluation,” in IEEE IECON Conf, Vienna (Austria), 10–13 November 2013, Conf. Proc., pp. 2632-2637.
18.
18.M. Actis Grande, R. Bidulský, A. Cavagnino, L. Ferraris, and P. Ferraris, “New lines of investigation on the effects of processing conditions on soft magnetic composite materials behaviour for electromagnetic applications,” in IEEE ECCE Conf., Atlanta (USA), 12–16 September 2010, Conf. Proc., pp. 986-991.
19.
19.H. Shokrollahi and K. Janghorban, “The effect of compaction parameters and particle size on magnetic properties of iron-based alloys used in soft magnetic composites,” Materials Science and Engineering B 134, 41-43 (2006).
http://dx.doi.org/10.1016/j.mseb.2006.07.015
20.
20.I. Hemmati, H. R. Madaah Hosseini, and A. Kianvash, “The correlations between processing parameters and magnetic properties of an iron–resin soft magnetic composite,” J. of Magnetism and Magnetic Materials 305, 147-151 (2006).
http://dx.doi.org/10.1016/j.jmmm.2005.12.004
21.
21.H. Shokrollahi and K. Janghorban, “Different annealing treatments for improvement of magnetic and electrical properties of soft magnetic composites,” J. of Magnetism and Magnetic Materials 317, 61-67 (2007).
http://dx.doi.org/10.1016/j.jmmm.2007.04.011
22.
22.A. G. Jack, B. C. Mecrow, and S. A. Evans, “Low cost SMC brushless DC motors for high volume applications in the automotive sector,” in IEE PEMD Conf., Edinburgh (UK), 31 March–1 April 2004, Conf. Proc., pp. 356-360.
23.
23.M. Actis Grande, A. Boglietti, A. Cavagnino, L. Ferraris, and P. Ferraris, “Experimental analysis of materials for electromagnetic converters obtainable by powder pressing,” in IEEE IECON Conf., Porto (Portugal), 2–5 november 2009, Conf. Proc., pp. 1130-1135.
24.
24.Y. Okada and H. Dohmeki, “Examination about the stator structure of the brushless DC motor manufactured in the soft magnetic composite,” in IEEE ICEMS Conf., Tokyo (Japan), 15–18 November 2009, Conf. Proc.
25.
25.M. Actis Grande, R. Bidulský, A. Cavagnino, L. Ferraris, and P. Ferraris, “Investigations on different processing conditions on soft magnetic composite material behavior al low frequency,” IEEE Trans. On Ind. Appl. 48, 1335-1343 (2012).
http://dx.doi.org/10.1109/TIA.2012.2199951
26.
26.N. Tsuchiya and M. Morimoto, “Iron loss characteristics of induction motor made of soft magnetic composite (SMC),” in IEEE ICEMS Conf., Incheon (South Korea), 10–13 October 2010, Conf. Proc., pp. 1337-1340.
27.
27.O. de la Barrie‘re, C. Appino, F. Fiorillo, C. Ragusa, H. Ben Ahmed, M. Gabsi, F. Mazaleyrat, and M. LoBue, “Loss separation in soft magnetic composites,” AIP Journal of Applied Physics 109 (2011).
28.
28.J. Cros, P. Viarouge, and M. Taghizadeh Kakhki, “Design and optimization of soft magnetic composite machines with finite element methods,” IEEE Trans. On Magn 47, 4384-4390 (2011).
http://dx.doi.org/10.1109/TMAG.2011.2157113
http://aip.metastore.ingenta.com/content/aip/journal/adva/6/5/10.1063/1.4943413
Loading
/content/aip/journal/adva/6/5/10.1063/1.4943413
Loading

Data & Media loading...

Loading

Article metrics loading...

/content/aip/journal/adva/6/5/10.1063/1.4943413
2016-03-02
2016-09-26

Abstract

The chance to move from 2D to 3D approach in the design of the electrical machines is made possible by the availability of Soft Magnetic Composites (SMC), iron based powders, insulated and pressed to realize shapes otherwise impossible with the traditional lamination sheets technology. Some commercial products are available on the market as “ready to press” powders, which presents good magnetic and energetic properties but are sometimes weak under the mechanical point of view; other products aim at improving this aspect but with considerable process complications and relative cost. The experience of the Authors in the realization of bonded magnets with the adoption of selected organic resins has been partly transferred in the research field of the SMC in order to investigate the possibility to obtain good mechanical properties maintaining the magnetic characteristics of the Insulated IronPowder Compounds (I.I.P.C.) taken as reference. The paper presents the activity that has been carried out in the realization of SMC mixing ironpowders and phenolic resin, in different weight percentages and mold pressures. The obtained results are considered satisfactory under the point of view of the compromise between magnetic and mechanical properties, considering also that the required productive process is simpler. The comparison of the obtained results with those related to commercial products encourages to carry on the research, also because of the reduced cost of the proposed SMC at parity (or better) performance.

Loading

Full text loading...

/deliver/fulltext/aip/journal/adva/6/5/1.4943413.html;jsessionid=llZrZ3EBTSczALxw_l_ystWR.x-aip-live-06?itemId=/content/aip/journal/adva/6/5/10.1063/1.4943413&mimeType=html&fmt=ahah&containerItemId=content/aip/journal/adva
true
true

Access Key

  • FFree Content
  • OAOpen Access Content
  • SSubscribed Content
  • TFree Trial Content
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
/content/realmedia?fmt=ahah&adPositionList=
&advertTargetUrl=//oascentral.aip.org/RealMedia/ads/&sitePageValue=aipadvances.aip.org/6/5/10.1063/1.4943413&pageURL=http://scitation.aip.org/content/aip/journal/adva/6/5/10.1063/1.4943413'
Right1,Right2,Right3,