No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
CrAlN coating to enhance the power loss and magnetostriction in grain oriented electrical steel
2.J. W. Shilling, “Domain Structure During Magnetization of Grian-Oriented 3% Si-Fe as a function of Applied Tensile Stress,” Journal of Applied Physics 42, 1787-1789 15 Mach 1971.
3.H. Haiji, K. Okada, T. Hiratani, M. Abe, and M. Ninomiya, “Magnetic properties and workability of 6.5% Si steel sheet,” Journal of Magnetism and Magnetic Materials 160, 109-114 (1996).
4.E. Beyer, L. Lahn, C. Schepers, and T. Stucky, “The influence of compressive stress applied by hard coatings on the power loss of grain oriented electrical steel sheet,” Journal of Magnetism and Magnetic Materials 323, 1985-1991 (2011).
5.V. Goel, P. Anderson, J. Hall, F. Robinson, and S. Bohm, “Application of Co-Ni-P coating on grain-oriented electrical steel,” IEEE transactions on magnetics (2015) (DOI 10.1109/TMAG.2015.2496315).
7.A. E. Reiter, V. H. Derflinger, B. Hanselmann, T. Bachmann, and B. Sartory, “Investigation of the properties of Al1−xCrxN coatings prepared by cathodic arc evaporation,” Surface & Coatings Technology 200, 2114-2122 (2005).
8.R. Sanjine’s, O. Banakh, C. Rojas, P. E. Schmid, and F. Lévy, “Electronic properties of Cr1yxAlxN thin films deposited by reactive magnetron sputtering,” Thin Solid Films 420-421, 312-317 (2002).
9.P. Anderson, “Measurement techniques for the assessment of materials under complex magnetising conditions,” Electrical review 87, 61-64 (2011).
10.P. I. Anderson, A. J. Moses, and H. J. Stanbury, “Assessment of the Stress Sensitivity of Magnetostriction in Grain-Oriented Silicon Steel,” IEEE Transactions on Magnetics 43, 3467-3476 (2007).
11.R. J. Taylor and J. A. Watt, “Magnetic pattern viewer,” US Patent 034754 A (1991).
12.C. R. Boon and J. A. Robey, “Effect of domain-wall motion on power loss in grainoriented silicon-iron sheet,” Proceedings of the IEEE 115, 1535-1540 (1968).
Article metrics loading...
Grain oriented electrical steels (GOES) are coated with aluminium orthophosphate on top of a forsterite (Mg2SiO4) layer to provide stress and insulation resistance to reduce the power loss and magnetostriction. In this work ChromiumAluminium Nitride (CrAlN) was coated on GOES samples with electron beam physical vapour deposition and was tested in the single strip and magnetostriction tester to measure the power loss and magnetostriction before and after coating. Power loss was reduced by 2% after coating and 6 % post annealing at 800 °C. For applied compressive stress of 6 MPa, the magnetostrictive strain was zero with the CrAlN coating as compared to 22 and 24 μϵ for fully finished GOES and GOES without phosphate coating. The thickness of the coating was found to be 1.9 ± 0.2 μm estimated with Glow Discharge Optical Emission Spectroscopy (GDOES). The magnetic domain imaging showed domain narrowing after coating. The reduction in power loss and magnetostriction was due to the large residual compressive stress and Young’s modulus (270 GPa) of the coating.
Full text loading...
Most read this month