Skip to main content
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
/content/aip/journal/adva/6/5/10.1063/1.4948697
1.
1.S. Roundy, K. P. Wright, and J. Rabaey, Computer communications 99 (2003).
2.
2.C. Sun, J. Shin, and J D Bayer, Energy & Environmental Science 4(11), 4508 (2011).
http://dx.doi.org/10.1039/c1ee02241e
3.
3.J Granstrom, J Feenstra, A H Sodano et al., Smart Materials and Structures 16(5), 1810 (2007).
http://dx.doi.org/10.1088/0964-1726/16/5/036
4.
4.A Bibo and F M Daqaq, Applied Physics Letters 102(24), 243904 (2013).
http://dx.doi.org/10.1063/1.4811408
5.
5.J Y Wang, D C Chen, and K C Sung, IEEE/ASME Transactions on Mechatronics 18(2), 754 (2013).
http://dx.doi.org/10.1109/TMECH.2012.2183640
6.
6.Y Qi, T N Jafferis, K Lyons, Jr., M C Lee, Ahmad, H, McAlpine, and C M Michael, Nano Letters 10(2), 524 (2010).
http://dx.doi.org/10.1021/nl903377u
7.
7.C J Park, Y J Park, and P Y Lee, Microelectromechanical Systems 19(5), 1215 (2010).
http://dx.doi.org/10.1109/JMEMS.2010.2067431
8.
8.A Erturk, O Bilgen, M Fontenille, and J D Inman, in Proceedings of the 19th International Conference on Adaptive Structures and Technologies, Oct, 6 (2008).
9.
9.R S Anton and J. D Inman, International Society for Optics and Photonics 6928, 692824 (2008).
10.
10.G N Elvin and A A Elvin, Journal of Intelligent Material Systems and Structures 20, 1 (2009).
11.
11.C De Marqui, G W Vieira, A Erturk, and J D Inman, Journal of Vibration and Acoustics 133, 011003 (2011).
http://dx.doi.org/10.1115/1.4002785
12.
12.C A J Dias, C De Marqui, and A Erturk, AIAA journal 53(2), 394 (2014).
http://dx.doi.org/10.2514/1.J053108
13.
13.L Tang, P M Païdoussis, and J Jiang, Journal of Sound and Vibration 326(1), 263 (2009).
http://dx.doi.org/10.1016/j.jsv.2009.04.041
14.
14.S Michelin and O Doaré, Journal of Fluid Mechanics 714, 489 (2013).
http://dx.doi.org/10.1017/jfm.2012.494
15.
15.A Abdelkefi, H A Nayfeh, and R M Hajj, Nonlinear Dynamics 68(4), 531 (2012).
http://dx.doi.org/10.1007/s11071-011-0234-9
16.
16.A Abdelkefi, International Journal of Engineering Science 100, 112 (2016).
http://dx.doi.org/10.1016/j.ijengsci.2015.10.006
17.
17.Y Watanabe, K Isogai, S Suzuki, and M Sugihara, Journal of Fluids and Structures 16(4), 543 (2002).
http://dx.doi.org/10.1006/jfls.2001.0436
http://aip.metastore.ingenta.com/content/aip/journal/adva/6/5/10.1063/1.4948697
Loading
/content/aip/journal/adva/6/5/10.1063/1.4948697
Loading

Data & Media loading...

Loading

Article metrics loading...

/content/aip/journal/adva/6/5/10.1063/1.4948697
2016-05-02
2016-09-25

Abstract

This paper proposes a novel structure for pre-rolled flexible piezoelectric cantilevers that use wind energy to power a submunition electrical device. Owing to the particular installation position and working environment, the submunition piezoelectric cantilever should be rolled when not working, but this pre-rolled state can alter the energy harvesting performance. Herein, a working principle and installation method for piezoelectric cantilevers used in submunitions are introduced. To study the influence of the pre-rolled state, pre-rolled piezoelectric cantilevers of different sizes were fabricated and their performances were studied using finite element analysis simulations and experiments. The simulation results show that the resonance frequency and stiffness of the pre-rolled structure is higher than that of a flat structure. Results show that, (1) for both the pre-rolled and flat cantilever, the peak voltage will increase with the wind speed. (2) The pre-rolled cantilever has a higher critical wind speed than the flat cantilever. (3) For identical wind speeds and cantilever sizes, the peak voltage of the flat cantilever (45 V) is less than that of the pre-rolled cantilever (56 V). (4) Using a full-bridge rectifier, the output of the pre-rolled cantilever can sufficiently supply a 10 μF capacitor, whose output voltage may be up to 23 V after 10 s. These results demonstrate that the pre-rolled piezoelectric cantilever and its installation position used in this work are more suitable for submunition, and its output sufficiently meets submunition requirements.

Loading

Full text loading...

/deliver/fulltext/aip/journal/adva/6/5/1.4948697.html;jsessionid=q0anAfBrbKJAe3H1uXnnWStR.x-aip-live-03?itemId=/content/aip/journal/adva/6/5/10.1063/1.4948697&mimeType=html&fmt=ahah&containerItemId=content/aip/journal/adva
true
true

Access Key

  • FFree Content
  • OAOpen Access Content
  • SSubscribed Content
  • TFree Trial Content
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
/content/realmedia?fmt=ahah&adPositionList=
&advertTargetUrl=//oascentral.aip.org/RealMedia/ads/&sitePageValue=aipadvances.aip.org/6/5/10.1063/1.4948697&pageURL=http://scitation.aip.org/content/aip/journal/adva/6/5/10.1063/1.4948697'
Right1,Right2,Right3,