No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Membrane-type resonator as an effective miniaturized tuned vibration mass damper
C. R. Fuller, S. Elliott, and P. A. Nelson, Active control of vibration (Academic Press, 1996).
A. Preumont, Vibration control of active structures: an introduction (Springer Science & Business Media, 2012), Vol. 50.
D. Karnopp, M. J. Crosby, and R. Harwood, “Vibration control using semi-active force generators,” Journal of Manufacturing Science and Engineering 96, 619–626 (1974).
L. Cremer and M. Heckl, Structure-borne sound: structural vibrations and sound radiation at audio frequencies (Springer Science & Business Media, 2013).
D. J. Mead, Passive vibration control (John Wiley & Sons Inc, 1999).
J. Den Hartog and J. Ormondroyd, “Theory of the dynamic vibration absorber,” ASME J. Appl. Mech 50, 11–22 (1928).
M. P. Singh, S. Singh, and L. M. Moreschi, “Tuned mass dampers for response control of torsional buildings,” Earthquake engineering & structural dynamics 31, 749–769 (2002).
L. Zuo and S. A. Nayfeh, “The two-degree-of-freedom tuned-mass damper for suppression of single-mode vibration under random and harmonic excitation,” Journal of vibration and acoustics 128, 56–65 (2006).
S.-M. Kim, S. Wang, and M. J. Brennan, “Dynamic analysis and optimal design of a passive and an active piezo-electrical dynamic vibration absorber,” Journal of sound and vibration 330, 603–614 (2011).
M. Khun, H. Lee, and S. Lim, “Structural intensity in plates with multiple discrete and distributed spring–dashpot systems,” Journal of Sound and Vibration 276, 627–648 (2004).
M. B. Ozer and T. J. Royston, “Extending den hartogs vibration absorber technique to multi-degree-of-freedom systems,” Journal of Vibration and Acoustics 127, 341–350 (2005).
J. Zapfe and G. Lesieutre, “Broadband vibration damping using highly distributed tuned mass absorbers,” AIAA journal 35, 753–755 (1997).
R. L. Harne and C. R. Fuller, “Modeling of a passive distributed vibration control device using a superposition technique,” Journal of Sound and Vibration 331, 1859–1869 (2012).
R. Harne, “On the linear elastic, isotropic modeling of poroelastic distributed vibration absorbers at low frequencies,” Journal of Sound and Vibration 332, 3646–3654 (2013).
C. Sun, S. Nagarajaiah, and A. Dick, “Experimental investigation of vibration attenuation using nonlinear tuned mass damper and pendulum tuned mass damper in parallel,” Nonlinear Dynamics 78, 2699–2715 (2014).
J. Mei, G. Ma, M. Yang, Z. Yang, W. Wen, and P. Sheng, “Dark acoustic metamaterials as super absorbers for low-frequency sound,” Nature communications 3, 756 (2012).
G. Ma, M. Yang, S. Xiao, Z. Yang, and P. Sheng, “Acoustic metasurface with hybrid resonances,” Nature Materials 13, 873-878 (2014).
Article metrics loading...
Damping of low frequency vibration by lightweight and compact devices has been a serious challenge in various areas of engineering science. Here we report the experimental realization of a type of miniature low frequency vibration dampers based on decorated membrane resonators. At frequency around 150 Hz, two dampers, each with outer dimensions of 28 mm in diameter and 5 mm in height, and a total mass of 1.78 g which is less than 0.6% of the host structure (a nearly free-standing aluminum beam), can reduce its vibrational amplitude by a factor of 1400, or limit its maximum resonance quality factor to 18. Furthermore, the conceptual design of the dampers lays the foundation and demonstrates the potential of further miniaturization of low frequency dampers.
Full text loading...
Most read this month