No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Uniform and refreshable liquid electroluminescent device with a back side reservoir
2. I. Yagi, N. Hirai, Y. Miyamoto, M. Noda, A. Imaoka, N. Yoneya, K. Nomoto, J. Kasahara, A. Yumoto, and T. Urabe, J. Soc. Inf. Disp. 16, 15 (2008).
3. D. Fish, M. Childs, D. George, A. Steer, N. Young, M. Johnson, A. Giraldo, and H. Lifka, SID Int. Symp. Digest Tech. Papers 2002, 968.
4. D. Fish, M. Childs, S. Deane, J. Shannon, W. Steer, N. Young, A. Giraldo, H. Lifka, and W. Oepts, J. Soc. Inf. Disp. 13, 131 (2005).
5. T. Tsujimura, W. Zhu, S. Mizukoshi, N. Mori, K. Miwa, S. Ono, Y. Maekawa, K. Kawabe, and M. Kohno, SID Int. Symp. Digest Tech. Papers 2007, 84.
See supplementary material at http://dx.doi.org/10.1063/1.4749791
for synthesis of PLT; photophysical characteristics of PLT; EL characteristics of the device with ITO-coated glass substrates; and luminance changes of the device with ITO-coated glass substrates. [Supplementary Material]
Article metrics loading...
We fabricated a refreshable organic light-emitting diode with a liquid emitting layer. This device has a mesh-structured cathode and a liquid reservoir in the back side of the cathode for easy convection of the liquid emitter. The small uniform gap between the electrodes was fabricated by means of micro-electro-mechanical systems (MEMS) processing. Although the device luminance decreased because of decomposition of the liquid emitters under the drive current, the decreased emission was quickly recovered to the initial state by convectional replacement of the decomposed emitters with fresh emitters through the holes of the mesh cathode.
Full text loading...
Most read this month