banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Metamaterial particles for electromagnetic energy harvesting
Rent this article for
View: Figures


Image of FIG. 1.
FIG. 1.

Split ring resonator unit cell.

Image of FIG. 2.
FIG. 2.

Electric field distribution in the plane of the SRR. The SRR on the left is operating at the resonance frequency of 5.8 GHz, while the one on the right is at the frequency of 5.6 GHz. The scale ranges from 10 V/m (dark blue) to 201760 V/m (dark red).

Image of FIG. 3.
FIG. 3.

Fabricated SRR with a 2.7 KΩ resistor placed in the gap.

Image of FIG. 4.
FIG. 4.

Experimental setup used to measure the voltage induced across a resistor placed at the gap an SRR.

Image of FIG. 5.
FIG. 5.

A block diagram for a generic electromagnetic energy harvesting system employing an antenna as the primary collector.

Image of FIG. 6.
FIG. 6.

A 9 × 9 SRR array plate.

Image of FIG. 7.
FIG. 7.

Numerical simulation setup for electromagnetic energy collection using a horn antennas as the source of radiation and an SRR array as the collector.

Image of FIG. 8.
FIG. 8.

Energy harvesting efficiency of the 9 × 9 SRR array for three different incident field angles as described in Fig. 7 .


Article metrics loading...


Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Metamaterial particles for electromagnetic energy harvesting