1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Switching mirror in the CdTe-based photonic crystal
Rent:
Rent this article for
USD
10.1063/1.1954876
/content/aip/journal/apl/87/1/10.1063/1.1954876
http://aip.metastore.ingenta.com/content/aip/journal/apl/87/1/10.1063/1.1954876
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

Diagram of bistable switching in a nonlinear Fabry-Pérot cavity with the free-carrier nonlinearity. The vertical line corresponds to the linear nondetuned case. The short-dashed curve corresponds to the low incident intensity, while the long-dashed curve represents the high intensity case. Cross sections between the resonator’s characteristic (thick line) and the intensity curves yields the corresponding graphical solution for a given operating point.

Image of FIG. 2.
FIG. 2.

Reflectivity vs refractive index change in the CdTe layers with at . Horizontal lines correspond to the required reflectivities of 10% and 99%, respectively. The vertical line denotes a low incident intensity, while the minimum reflectivity is at a high incident intensity. High-extinction-ratio switching is achieved.

Image of FIG. 3.
FIG. 3.

Nonlinear CdTe-based Bragg mirror (one-dimensional photonic crystal with a defect).

Loading

Article metrics loading...

/content/aip/journal/apl/87/1/10.1063/1.1954876
2005-06-28
2014-04-16
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Switching mirror in the CdTe-based photonic crystal
http://aip.metastore.ingenta.com/content/aip/journal/apl/87/1/10.1063/1.1954876
10.1063/1.1954876
SEARCH_EXPAND_ITEM