1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Synthesis of bulk metallic glass foam by powder extrusion with a fugitive second phase
Rent:
Rent this article for
USD
10.1063/1.2221882
/content/aip/journal/apl/89/2/10.1063/1.2221882
http://aip.metastore.ingenta.com/content/aip/journal/apl/89/2/10.1063/1.2221882
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

(Color online) SEM images of a BMG foam. Pores are uniformly distributed throughout the sample. The volume fraction of porosity is around 40% with an average size of . (a) Macrostructure of Ni-based BMG foam. (b) Longitudinal image of Ni-based BMG foam. (c) Transverse cross-sectional image of Ni-based BMG foam.

Image of FIG. 2.
FIG. 2.

(Color online) (a) X-ray diffraction pattern from BMG foam and (b) DSC traces from as-atomized powder and BMG foam; heating rate was .

Image of FIG. 3.
FIG. 3.

(Color online) (a) Compressive stress-strain curves from BMG foam. Strain rate was . Solid curve is from a sample loaded to 1 where test was stopped due to an instrument-limited load drop of 30%. The dotted curve is from a second sample loaded until deviation from linear stress-strain behavior occurred, 2. SEM images in (b) and (c) show the structures of the samples after the two different loading conditions.

Loading

Article metrics loading...

/content/aip/journal/apl/89/2/10.1063/1.2221882
2006-07-14
2014-04-21
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Synthesis of bulk metallic glass foam by powder extrusion with a fugitive second phase
http://aip.metastore.ingenta.com/content/aip/journal/apl/89/2/10.1063/1.2221882
10.1063/1.2221882
SEARCH_EXPAND_ITEM