1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Criterion for predicting the glass-forming ability of alloys
Rent:
Rent this article for
USD
10.1063/1.2713867
/content/aip/journal/apl/90/11/10.1063/1.2713867
http://aip.metastore.ingenta.com/content/aip/journal/apl/90/11/10.1063/1.2713867

Figures

Image of FIG. 1.
FIG. 1.

XRD patterns of blended elemental powder mix of as a function of milling time. Note that the amorphous phase has started to form on milling for about and that the amorphous phase was stable up to about . Milling beyond this time resulted in mechanical crystallization of the amorphous powder.

Image of FIG. 2.
FIG. 2.

XRD patterns of blended elemental powder mix of at early times of milling. Note that formation of intermetallics is observed during early hours of milling. At longer milling times, e.g., more than , an amorphous phase begins to form (Fig. 1).

Image of FIG. 3.
FIG. 3.

XRD patterns of powder mix as a function of milling time. Note that an amorphous phase had not formed in this case; instead, only a solid solution phase was obtained on milling for .

Tables

Generic image for table
Table I.

Summary of the results of amorphization including the number of intermetallics between the element and Zr, Fe, or B.

Generic image for table
Table II.

Representative maximum energy contributed by different crystalline defects.

Loading

Article metrics loading...

/content/aip/journal/apl/90/11/10.1063/1.2713867
2007-03-16
2014-04-21
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Criterion for predicting the glass-forming ability of alloys
http://aip.metastore.ingenta.com/content/aip/journal/apl/90/11/10.1063/1.2713867
10.1063/1.2713867
SEARCH_EXPAND_ITEM