1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The effect of coating in increasing the critical size of islands on a compliant substrate
Rent:
Rent this article for
USD
10.1063/1.2742911
/content/aip/journal/apl/90/21/10.1063/1.2742911
http://aip.metastore.ingenta.com/content/aip/journal/apl/90/21/10.1063/1.2742911
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

Schematic of an array of islands on a compliant substrate. A compliant coating is applied as a blanket film over the islands and substrate.

Image of FIG. 2.
FIG. 2.

Inset shows a unit cell used in calculation. Shear stress along the interface is plotted as a function of the distance from the left edge of the island. The shear stress decreases as the modulus of the coating increases.

Image of FIG. 3.
FIG. 3.

Inset shows a unit cell used in the calculation. Flaws are added on the interface near the edges. The normalized ERR of a flaw is plotted as a function of the normalized modulus of the coating.

Image of FIG. 4.
FIG. 4.

(a) Normalized ERR is plotted as a function of normalized crack size. (b) Mode angle is plotted as a function of normalized crack size.

Image of FIG. 5.
FIG. 5.

Normalized ERR is plotted as a function of the normalized island size.

Loading

Article metrics loading...

/content/aip/journal/apl/90/21/10.1063/1.2742911
2007-05-22
2014-04-23
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: The effect of coating in increasing the critical size of islands on a compliant substrate
http://aip.metastore.ingenta.com/content/aip/journal/apl/90/21/10.1063/1.2742911
10.1063/1.2742911
SEARCH_EXPAND_ITEM