1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers
Rent:
Rent this article for
USD
10.1063/1.2795337
/content/aip/journal/apl/91/14/10.1063/1.2795337
http://aip.metastore.ingenta.com/content/aip/journal/apl/91/14/10.1063/1.2795337
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

Schematic diagram of the SSC comprised of horizontal linear and vertical nonlinear tapers in cascade.

Image of FIG. 2.
FIG. 2.

Calculated light intensity and equiphase distributions along the arc-tangential nonlinear vertical taper.

Image of FIG. 3.
FIG. 3.

The longitudinal cross section of the fabricated vertical nonlinear taper.

Image of FIG. 4.
FIG. 4.

(a) Microphotograph of the output end of the vertical nonlinear taper and the corresponding expanded light beam pattern observed. (b) Measured intensity profiles of the output light beam pattern. Figures by the curves represent MFDs defined by the full width at the maximum.

Loading

Article metrics loading...

/content/aip/journal/apl/91/14/10.1063/1.2795337
2007-10-04
2014-04-19
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: A silicon-based spot-size converter between single-mode fibers and Si-wire waveguides using cascaded tapers
http://aip.metastore.ingenta.com/content/aip/journal/apl/91/14/10.1063/1.2795337
10.1063/1.2795337
SEARCH_EXPAND_ITEM