1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Texture memory and strain-texture mapping in a NiTi shape memory alloy
Rent:
Rent this article for
USD
10.1063/1.2768899
/content/aip/journal/apl/91/6/10.1063/1.2768899
http://aip.metastore.ingenta.com/content/aip/journal/apl/91/6/10.1063/1.2768899
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

(Color online) Macroscopic strain-temperature curve for a rolled NiTi sheet sample during thermomechanical cycling at applied stress. The strain path is indicated sequentially by the letters , , , , , , , , and .

Image of FIG. 2.
FIG. 2.

(Color online) Inverse pole figures (IPFs), volume fraction (vol %), and macroscopic strain (,%) of martensite and austenite in both the loading and transverse directions, during thermal cycling at applied stress. The maximum pole density in each IPF is marked at the right bottom corner. The center and rightmost point in the IPFs represent (001) and (100) poles, respectively, for the phase, while the top, right, and center directions are (001), (010), and (100) poles for the phase, respectively.

Image of FIG. 3.
FIG. 3.

(Color online) Calculated strain-texture map or pole figure in the martensite phase corresponding to uniaxial loading. The poles are shown in brackets, and the contour lines represent values of strain in percent that results from transformation of to the particular pole.

Loading

Article metrics loading...

/content/aip/journal/apl/91/6/10.1063/1.2768899
2007-08-06
2014-04-19
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Texture memory and strain-texture mapping in a NiTi shape memory alloy
http://aip.metastore.ingenta.com/content/aip/journal/apl/91/6/10.1063/1.2768899
10.1063/1.2768899
SEARCH_EXPAND_ITEM