banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Magnetic field tuning of coplanar waveguide resonators
Rent this article for
View: Figures


Image of FIG. 1.
FIG. 1.

Sketch of a CPR. Angles indicate the in-plane and out-of-plane orientation of the magnetic field with respect to the substrate. Inset: photograph of the CPR, comprising a center conductor of length and width separated from ground planes by an gap. The center conductor is capacitively coupled to the feed lines by gap of at each end. The meander line is used to confine the whole structure within the long substrate.

Image of FIG. 2.
FIG. 2.

Dependence of resonant frequency and quality factor on temperature for an overcoupled CPR fabricated on a sapphire substrate.

Image of FIG. 3.
FIG. 3.

(a) Quality factor, (b) sensitivity to magnetic field, and (c) center frequency shift with respect to . The power was measured at the output of the VNA ( corresponds to about on the sample). The measurements were made with the field applied at at various temperatures, two excitation powers and two directions of the field sweep.

Image of FIG. 4.
FIG. 4.

Change in resonant frequency with perpendicular magnetic field for the fundamental, first, and second harmonics. The inset shows the dependence of fundamental frequency shift on the angle at .


Article metrics loading...


Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Magnetic field tuning of coplanar waveguide resonators