No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Indium tin oxide modified transparent nanotube thin films as effective anodes for flexible organic light-emitting diodes
3.A. R. Schlatmann, D. W. Floet, A. Hillberer, F. Garten, P. J. M. Smulders, T. M. Klapwijk, and G. Hadziioannou, Appl. Phys. Lett. 69, 1764 (1996).
4.T. Jansseune, Compound Semiconductor Magazine, Sept 2003.
12.M. W. Rowell, M. A. Topinka, M. D. McGehee, H.-J. Prall, G. Dennler, N. S. Sariciftci, L. Hu, and G. Grüner, Appl. Phys. Lett. 88, 233506 (2006).
14.Y. Yang, Q. Huang, A. W. Metz, J. Ni, S. Jin, T. J. Marks, M. E. Madsen, A. DiVenere, and S.-T. Ho, Adv. Mater. (Weinheim, Ger.) 16, 321 (2004).
Article metrics loading...
Sn-doped (ITO) modified single-walled carbon nanotube (SW-CNT) transparent electrodes are fabricated on flexible polyethyleneterephthalate (PET) substrates by stamp printing SW-CNT films, followed by room temperature ion-assisted deposition of ITO. Polymer light-emitting diodes(PLEDs) using such film as anodes exhibit superior performance versus CNT-only controls. Flexible PLEDs with the following structure: PET/CNT(30 nm)-ITO(45 nm)/poly (3,4-ethylenedioxythiophene) poly (styrenesulfonate)/[poly(9,9-dioctyl-fluorene-co-N-(4-butylphenyl)diphenylamine)]+-bis[(p-trichlorosilyl propylphenyl)-phenylamino]biphenyl}/[poly(9,9-dioctylfluorene-co-benzothiadiazole)]/CsF/Al, achieve a maximum light output of with a current efficiency of . Bending test comparisons with ITO/PET show the ITO modified CNT/PET electrodes to be far more mechanically flexible.
Full text loading...
Most read this month