No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Magnetic hysteresis curve influenced by power-semiconductor characteristics in pulse-width-modulation inverter
1.Japanese Industrial Standards, “JIS C 2550” (1996).
2.International Electrotechnical Commission, “IEC 60404”, 2nd ed. (1992).
3. M. Sakai and K. Fujisaki, The Papers of Technical Meeting on Semiconductor Power Converter (IEE Japan SPC-12-44, 2012), pp.97–102.
9. K. Fujisaki, M. Sakai, and S. Takeda, ICEMS2012Sapporo (15th International Conference on Electrical Machines and Systems), Sapporo, LS3B-3, November, 2012.
11. N. Mohan, T. M. Undeland, and W. Robbins, Power Electronics, 3rd ed. (John Wiley & Sons. Inc., 2003).
12.Mitsubishi Electric Corporation, “Mitsubishi intelligent power modules PM75RSA060 datasheet” (2000).
13.Mitsubishi Electric Corporation, “Mitsubishi diode modules RM30TB-M datasheet” (2000).
Article metrics loading...
The influence of power semiconductor characteristic in Pulse-width-modulation (PWM) inverter on the magnetic hysteresis curve in silicon steel is discussed through the measured magnetic hysteresis curves. The magnetic hysteresis curve of PWM inverter-fed silicon steel has a lot of minor loops as closed loops and open loops, which make an influence on the iron loss. Two shapes of minor loops are found to be caused by the voltage shifts and they are derived from the on-voltage of the semiconductors in PWM inverter circuit. Therefore, it is concluded that the power-semiconductor characteristic in PWM inverter makes an influence on the magnetic hysteresis curve in silicon steel.
Full text loading...
Most read this month