Skip to main content
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
/content/aip/journal/jap/117/1/10.1063/1.4905241
1.
1. J. Akedo , J. Am. Ceram. Soc. 89, 1834 (2006).
http://dx.doi.org/10.1111/j.1551-2916.2006.01030.x
2.
2. J. Akedo , S. Nakano , J. Park , S. Baba , and K. Ashida , Synthesiology 1, 130 (2008).
http://dx.doi.org/10.5571/synth.1.130
3.
3. J. Akedo , J. Therm. Spray Technol. 17, 181 (2008).
http://dx.doi.org/10.1007/s11666-008-9163-7
4.
4. J. Ryu , J. J. Choi , B. D. Hahn , D. S. Park , W. H. Yoon , and K. H. Kim , Appl. Phys. Lett. 90, 152901 (2007).
http://dx.doi.org/10.1063/1.2720751
5.
5. B. D. Hahn , D. S. Park , J. J. Choi , J. Ryu , W. H. Yoon , J. H. Choi , H. E. Kim , and S. G. Kim , Surf. Coat. Technol. 205, 3112 (2011).
http://dx.doi.org/10.1016/j.surfcoat.2010.11.029
6.
6. J. Iwasawa , R. Nishimizu , M. Tokita , M. Kiyohara , and K. Uematsu , J. Am. Ceram. Soc. 90, 2327 (2007).
http://dx.doi.org/10.1111/j.1551-2916.2007.01738.x
7.
7. B. K. Lee , D. S. Park , W. H. Yoon , J. Ryu , B. D. Hahn , and J. J. Choi , J. Korean Ceram. Soc. 46, 441 (2009).
http://dx.doi.org/10.4191/KCERS.2009.46.5.441
8.
8. B. D. Hahn , D. S. Park , J. J. Choi , J. Ryu , W. H. Yoon , K. H. Kim , C. Park , and H. E. Kim , J. Am. Ceram. Soc. 92, 683 (2009).
http://dx.doi.org/10.1111/j.1551-2916.2008.02876.x
9.
9. M. Telford , Mater. Today 7, 36 (2004).
http://dx.doi.org/10.1016/S1369-7021(04)00124-5
10.
10. A. Peker and W. L. Johnson , Appl. Phys. Lett. 63, 2342 (1993).
http://dx.doi.org/10.1063/1.110520
11.
11. J. Schroers , Adv. Mater. 22, 1566 (2010).
http://dx.doi.org/10.1002/adma.200902776
12.
12. O. Haruyama , Y. Nakayama , R. Wada , H. Tokunaga , J. Okada , T. Ishikawa , and Y. Yokoyama , Acta Mater. 58, 1829 (2010).
http://dx.doi.org/10.1016/j.actamat.2009.11.025
13.
13. J. M. Park , H. J. Chang , K. H. Han , W. T. Kim , and D. H. Kim , Scr. Mater. 53, 1 (2005).
http://dx.doi.org/10.1016/j.scriptamat.2005.03.024
14.
14. S.-W. Lee , M.-Y. Huh , E. Fleury , and J.-C. Lee , Acta Mater. 54, 349 (2006).
http://dx.doi.org/10.1016/j.actamat.2005.09.007
15.
15. E. S. Park , C. W. Ryu , W. T. Kim , and D. H. Kim , “A Novel GFA Parameter for Various Glass-Forming Alloys,” Met. Mater. Int. (in press).
16.
16. F. Cardarelli , Materials Handbook: A Consise Desktop Reference, 2nd ed. ( Springer, London, 2008).
17.
17. J. Lu , G. Ravichandran , and W. L. Johnson , Acta. Mater. 51, 3429 (2003).
http://dx.doi.org/10.1016/S1359-6454(03)00164-2
18.
18. R. Busch , Y. J. Kim , and W. L. Johnson , J. Appl. Phys. 77, 4039 (1995).
http://dx.doi.org/10.1063/1.359485
19.
19. E. V. Rozhitsina , S. Gruner , I. Kaban , W. Hoyer , V. E. Sidorov , and P. S. Popel , Russ. Metall. 2011, 118.
http://dx.doi.org/10.1134/S0036029511020108
20.
20. S. Y. Kim , S. J. Kim , S. S. Jee , J. M. Park , K. H. Park , S. C. Park , E. A. Cho , J. H. Lee , I. Y. Song , S. M. Lee , I. T. Han , K. R. Lim , W. T. Kim , J. C. Park , J. Eckert , D. H. Kim , and E. S. Lee , Sci. Rep. 3, 2185 (2013).
http://dx.doi.org/10.1038/srep02185
21.
21. G. Kumar , H. X. Tang , and J. Schroers , Nature 457, 868 (2009).
http://dx.doi.org/10.1038/nature07718
22.
22. R. Busch , E. Bakke , and W. L. Johnson , Acta. Mater. 46, 4725 (1998).
http://dx.doi.org/10.1016/S1359-6454(98)00122-0
23.
23. G. P. Martins , D. L. Olson , and G. R. Edwards , Metall. Trans. B 19, 95 (1988).
http://dx.doi.org/10.1007/BF02666495
http://aip.metastore.ingenta.com/content/aip/journal/jap/117/1/10.1063/1.4905241
Loading
/content/aip/journal/jap/117/1/10.1063/1.4905241
Loading

Data & Media loading...

Loading

Article metrics loading...

/content/aip/journal/jap/117/1/10.1063/1.4905241
2015-01-05
2016-09-26

Abstract

The interface anchoring and densification of YO coatings prepared by aerosol deposition (AD) process were systematically investigated for various types of metal substrates. At initial anchoring stage in AD process, the kinetic energy of impacted particles is converted to the heat energy, which instantly elevates the interface temperature between coating layer and substrate. Thus, the Sn substrate with low melting temperature (∼505 K) results in strong impact anchoring by local interface melting during AD process. On the other hand, the continuous collision and fracture of impacted particles lead to solid consolidation and densification of deposited coating layers. Thus, the SUS substrate with high hardness (∼173 Hv) leads to a highly densified coating layer. Indeed, the bulk metallic glass (BMG) substrates, which have unique low processable temperature (<800 K) called supercooled liquid region and ultra-high hardness (>500 Hv), give rise to both excellent interface anchoring and densification of thick YO layers with a nano-crystalline structure by AD process. These advantages of the BMG substrates can be used more widely by forming metallic glass buffer layer on various substrates applied to AD process.

Loading

Full text loading...

/deliver/fulltext/aip/journal/jap/117/1/1.4905241.html;jsessionid=51_ZTIsnI9BBbvNXnXc8N0Yd.x-aip-live-06?itemId=/content/aip/journal/jap/117/1/10.1063/1.4905241&mimeType=html&fmt=ahah&containerItemId=content/aip/journal/jap
true
true

Access Key

  • FFree Content
  • OAOpen Access Content
  • SSubscribed Content
  • TFree Trial Content
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
/content/realmedia?fmt=ahah&adPositionList=
&advertTargetUrl=//oascentral.aip.org/RealMedia/ads/&sitePageValue=jap.aip.org/117/1/10.1063/1.4905241&pageURL=http://scitation.aip.org/content/aip/journal/jap/117/1/10.1063/1.4905241'
Right1,Right2,Right3,