No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Flow structure and modeling issues in the closure region of attached cavitation
1.A. Kubota, H. Kato, H. Yamaguchi, and M. Maeda, “Unsteady structure measurement of cloud cavitation on a foil section using conditional sampling technique,” J. Fluids Eng. 111, 204 (1989).
2.V. H. Arakeri, A. J. Acosta, “Viscous effects in the inception of cavitation axisymmetric bodies,” J. Fluids Eng. 95, 519 (1973).
3.E. M. Gates, A. J. Acosta, “Some effects of several free stream factors on cavitation inception on axisymmetric bodies,” Proc. 12th Symp. Naval Hydrodynamics, Washington, DC (1978), 86–108.
4.J. Katz, “Cavitation phenomena within regions of flow separation,” J. Fluid Mech. 140, 497 (1984).
5.C. Y. Li and S. L. Ceccio, “Interaction of single traveling bubbles with the boundary layer and attached cavitation,” J. Fluid Mech. 323, 329 (1996).
6.R. E. A. Arndt, J. W. Holl, J. C. Bohn, and W. T. Bechtel, “The influence of surface irregularities on cavitation performance” J. Ship Res. 23, 157 (1979).
7.E. M. Harvey, W. D. McElroy, and A. H. Whiteley, “On cavity formation in water,” J. Appl. Phys. 18, 162 (1947).
8.A. J. Acosta and H. Hamaguchi, “Cavitation inception on the ITTC standard headform,” Rep. No. E-149.1, Hydrodynamics Laboratory, Caltech (1967).
9.F. B. Peterson, “Cavitation originating at liquid-solid interfaces,” DTNSRDC Rep. No. 2799 (1968).
10.M. Tulin, “Steady two dimensional flows about slender bodies,” DTMB Tech. Rep. 834 (1953).
11.M. P. Tulin, “Supercavitating flow past foils and struts,” Proc. NPL Symp. Cavitation Hydrodyn. (1955), paper no. 16, pp. 1–19.
12.M. P. Tulin, “Supercavitating flows—small perturbation theory,” J. Ship Res. 7(3), 16 (1964).
13.M. Tulin and C. Hsu, “New applications of cavity flow theory,” Proc. 13th Symp. Naval Hydrodynamics, Tokyo (1980).
14.T. Y. Wu, “A wake model for free-stream flow theory. Part 1: Fully and partially developed wake flows and cavity flows past an oblique flat plate,” J. Fluid Mech. 13, 161 (1962).
15.T. Wu, “Cavity and wake flows,” Annu. Rev. Fluid Mech. 4, 243 (1972).
16.K. R. Laberteaux and S. L. Ceccio, “Flow in the closure region of closed partial attached cavitation,” Third International Symposium on Cavitation, Grenoble, France (1998), pp. 197–202.
17.R. A. Furness and S. P. Hutton, “Experimental and theoretical studies of two-dimensional fixed-type cavities,” J. Fluids Eng. 97, 515 (1975).
18.A. Kubota, H. Kato, and H. Yamaguchi, “A new modeling of cavitating flows: A numerical study of unsteady cavitation on a hydrofoil section,” J. Fluid Mech. 240, 59 (1992).
19.C. Brennen, G. Reisman, and Y. C. Wang, “Shock waves in cloud cavitation,” Proc. 21st Symp. Naval Hydrodynamics (1996), pp. 756–771.
20.Y. Kawanami, H. Kato, H. Yamaguchi, M. Tanimura, and Y. Tagaya, “Mechanism and control of cloud cavitation,” J. Fluids Eng. 119, 788 (1997).
21.K. A. Morch, “On the collapse of cavity cluster in flow cavitation” Proc. 1st Intnl. Conf. on Cavitation and Inhomogeneities in underwater Acoustics, Springer Series in Electrophysics, No. 4 (1980), pp. 95–100.
22.K. A. Morch, “Cavity cluster dynamics and cavitation erosion,” ASME Cavitation and Polyphase Flow Forum (1981), pp. 1-10.
23.Y. C. Wang and C. E. Brennen, “Shock wave development in the collapse of a cloud of bubbles,” ASME Cavitation and Multiphase Flow Forum (1994), pp. 15–19.
24.L. Noordzij and L. van Wijngaarden, “Relaxation effects, caused by relative motion, on shock waves in gas-bubble/liquid mixtures,” J. Fluid Mech. 66, 115 (1974).
25.Y. Matsumoto, “Bubble dynamics in cavitation,” Third International Symposium on Cavitation, Grenoble, France (1998), pp. 3–8.
26.F. Avellan, P. Dupont, and I. Ryhming, “Generation mechanism and dynamics of cavitation vortices downstream of a fixed leading edge cavity,” Proc. 17th Symp. Naval Hydrodynamics (1988), pp. 317–329.
27.F. Larrarte, A. Pauchet, Ph. Bousquet, and D. H. Fruman, “On the morphology of natural and ventilated cavities,” ASME Cavitation and Multiphase Flow, FED-210 (1995), pp. 31–38.
28.D. F. de Lange, G. J. de Bruin, and L. van Wijngaarden, “On the mechanism of cloud cavitation-experiments and modeling,” 2nd International Symposium on Cavitation (1994), pp. 45–50.
29.Y. T. Shen and F. B. Peterson, “Unsteady cavitation on an oscillating hydrofoil,” Proc. 12th Symp. Naval Hydrodynamics (1978), pp. 362–384.
30.P. A. Lush and S. R. Skipp, “High speed cine observation of cavitating flow in a duct,” Int. J. Heat Fluid Flow 7, 283 (1986).
31.Q. Le, J. P. Franc, and J. M. Michel, “Partial cavities: Global behavior and mean pressure distribution,” J. Fluids Eng. 115, 243 (1993).
32.M. Callenaere, J. P. Franc, and J. M. Michel, “Influence of cavity thickness and pressure gradients on the unsteady behavior of partial cavities,” Third International Symposium on Cavitation, Grenoble, France (1998), pp. 209–214.
33.R. Dong, S. Chu, and J. Katz, “Quantitative visualization of the flow structure within the volute of a centrifugal pump, Part A: Technique,” J. Fluids Eng. 114, 390 (1992).
34.R. Dong, S. Chu, and J. Katz, “Quantitative visualization of the flow structure within the volute of a centrifugal pump, Part B: Results,” J. Fluids Eng. 114, 396 (1992).
35.S. Chu, S. Dong, and J. Katz, “Relationship between unsteady flow, pressure fluctuations and noise in a centrifugal pump. Parts A: Use of PDV data to compute the pressure field,” J. Fluids Eng. 117, 24 (1995).
36.S. Chu, S. Dong, and J. Katz, “Relationship between unsteady flow, pressure fluctuations and noise in a centrifugal pump. Part B: Effects of blade-tongue interactions,” J. Fluids Eng. 117, 30 (1995).
37.R. R. Dong, J. Katz, and T. T. Huang, “On the structure of bow waves on a ship model,” J. Fluid Mech. 346, 77 (1997).
38.R. Dong, S. Chu, and J. Katz, “Effect of modification to tongue and impeller geometry on unsteady flow, pressure fluctuations and noise in a centrifugal pump,” J. Turbomachinery 119, 506 (1997).
39.G. Sridhar and J. Katz, “Lift and drag forces on microscopic bubbles entrained by a vortex,” Phys. Fluids 7, 389 (1995).
40.G. Sridhar and J. Katz, “Effect of entrained bubbles on the structure of vortex rings,” J. Fluid Mech. 397, 171–202 (1999).
41.S. Liu, C. Meneveau, and J. Katz, “On the properties of similarity subgrid-scale models as deduced from measurements in a turbulent jet,” J. Fluid Mech. 275, 83 (1994).
42.M. Sinha and J. Katz, “Flow structure and turbulence in a centrifugal pump with a vaned diffuser,” Proc. ASME Fluids Engineering Division, Washington, DC (1998).
43.G. Roth, D. Hart, and J. Katz, “Feasibility of using the L64720 video motion estimation processor (MEP) to increase efficiency of velocity map generation for PIV,” ASME/EALA Sixth International Symposium on Laser Anemometry, Hilton Head, SC (1995).
44.L. M. Lourenco and K. Krothapalli, “On the accuracy of velocity and vorticity measurements with PIV,” Exp. Fluids 18, 421 (1995).
45.R. D. Keane and R. J. Adrian, “Optimization of particle image velocimeters. Part I: Double pulsed systems,” Meas. Sci. Technol. 1(11), 963 (1990).
46.V. H. Arakeri, “Viscous effects on the position of cavitation separation from smooth bodies,” J. Fluid Mech. 68, 779 (1975).
47.J. P. Franc and J. M. Michel, “Attached cavitation and the boundary layer: experimental investigation and numerical treatment,” J. Fluid Mech. 154, 63 (1985).
48.A. L. Tassin and S. L. Ceccio, “Examination of the flow near the leading edge of attached cavitation. Part 1. Detachment of two-dimensional and axisymmetric cavities,” J. Fluid Mech. 376, 61 (1998).
49.B. Gindroz and M. L. Billet, “Nuclei and propeller cavitation inception,” ASME Symposium on Cavitation and Gas-Liquid Flow in Fluid Machinery and Devices (1994), FED-190, pp. 251–260.
50.C. Brennen, “Cavity surface waves pattern and general appearance,” J. Fluid Mech. 44, 33 (1970).
51.Y. Zhang, S. Gopalan, and J. Katz, “On the flow structure and vorticity production due to sheet cavitation,” Proc. ASME Fluids Engineering Summer Meeting, FEDSM98-5301, Washington, DC (1998).
52.J. Zhang, B. Tao, and J. Katz, “Turbulent flow measurement in a square duct with hybrid holographic PIV,” Exp. Fluids 23, 373 (1997).
53.D. A. Drew and R. T. Lahey, Jr., “Analytical modeling of multiphase flow,” in Particulate two-phase flow, edited by M. C. Roco (Butterworth-Heinemann, Washington, DC, 1993), pp. 509–566.
54.J. O. Hinze, Turbulence—2nd Edition (McGraw-Hill, New York, 1975).
55.J. K. Eaton and J. P. Johnson, “Turbulent flow reattachment: An experimental study of the flow and structure behind A backward-facing step,” Report MD-39, Department of Mechanical Engineering, Stanford University (1980).
56.L. C. Burmeister, Convective Heat Transfer (Wiley, New York, 1993).
Article metrics loading...
Full text loading...
Most read this month
Most cited this month