No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Jetted mixtures of particle suspensions and resins
2. C. McIlroy, O. G. Harlen, and N. F. Morrison, “Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing,” J. Non-Newtonian Fluid Mech. 201, 17–28 (2013).
3. C. Bonnoit, T. Bertrand, E. Clément, and A. Lindner, “Accelerated drop detachment in granular suspensions,” Phys. Fluids 24, 043304 (2012).
4. E. Zarraga, D. A. Hill, and D. T. Leighton, “The characterization of the total stress of concentrated suspensions of non-colloidal spheres in Newtonian fluids,” J. Rheol. 44(2), 185–220 (2000).
Article metrics loading...
Drop-on-demand (DoD) ink-jetting of hard particle suspensions with volume fraction Φ ∼ 0.25 has been surveyed using 1000 ultra-high speed videos as a function of particle size (d90 = 0.8—3.6 μm), with added 2 wt. % acrylic (250 kDa) or 0.5 wt. % cellulose (370 kDa) resin, and also compared with Newtonian analogues. Jet break-off times from 80 μm diameter nozzles were insensitive (120 ± 10 μs) to particle size, and resin jet break-off times were not significantly altered by >30 wt. % added particles. Different particle size grades can be jetted equally well in practice, while resin content effectively controls DoD break-off times.
Full text loading...
Most read this month