1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Plasma flows in scrape-off layer of Aditya tokamak
Rent:
Rent this article for
USD
10.1063/1.4752415
/content/aip/journal/pop/19/9/10.1063/1.4752415
http://aip.metastore.ingenta.com/content/aip/journal/pop/19/9/10.1063/1.4752415
View: Figures

Figures

Image of FIG. 1.
FIG. 1.

(a) Front and side views of the probe head (schematic), (b) top view of the Aditya tokamak showing toroidal separation between the limiter and the probe head.

Image of FIG. 2.
FIG. 2.

The I-V characteristic of the unmagnetized probe. The fitted line indicates , where a = 0.812, b = −0.049, and c = −0.412 and the regression coefficient, R-square = 0.99.

Image of FIG. 3.
FIG. 3.

(a) Radial profile of electron temperature measured by a Langmuir probe mounted on the top port in discharges similar to the presented ones; (b)floating potential profile in identical discharges.

Image of FIG. 4.
FIG. 4.

Schematic diagram showing plasma position (exaggerated). The probe positions (on both radial and top ports) are fixed with respect to the limiter, but plasma positions in different discharges may be different.

Image of FIG. 5.
FIG. 5.

(a) Radial profile of mean plasma densities measured by the Mach probe at radial port, and (b) radial profile of plasma density measured by the single Langmuir probe at the top port. The error bars indicate the scatter in the data.

Image of FIG. 6.
FIG. 6.

(a) Radial profile of the Mach numbers, and (b) dependence of Mach numbers on the mean plasma density. The error bars indicate scatter in the data.

Image of FIG. 7.
FIG. 7.

Schematic diagram of Aditya SOL flows. “R” and “T” indicate physical locations of Mach probe on the radial and top ports respectively and “Measured” indicates the measured flow direction. The hatched lines indicate two faces of the limiter and “Plasma contact point” indicates the contact of the plasma LCFS with the limiter [see Fig. 4 ]. Note that the connection length at the top probe is as explained.

Loading

Article metrics loading...

/content/aip/journal/pop/19/9/10.1063/1.4752415
2012-09-14
2014-04-16
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Plasma flows in scrape-off layer of Aditya tokamak
http://aip.metastore.ingenta.com/content/aip/journal/pop/19/9/10.1063/1.4752415
10.1063/1.4752415
SEARCH_EXPAND_ITEM