1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Simultaneous velocity and pressure measurements using luminescent microspheres
Rent:
Rent this article for
USD
10.1063/1.3422324
/content/aip/journal/rsi/81/6/10.1063/1.3422324
http://aip.metastore.ingenta.com/content/aip/journal/rsi/81/6/10.1063/1.3422324

Figures

Image of FIG. 1.
FIG. 1.

The modRLD method for the calculation of lifetime from time domain imaging. Here, the value of . I and II represent the integrated areas under their respective portions of the decay curve.

Image of FIG. 2.
FIG. 2.

Schematic of square syringe.

Image of FIG. 3.
FIG. 3.

Plots of the pressure measured within the square syringe with respect to the reciprocal of its volume. The linear relationship when the plunger is pushed in and pulled out shows good agreement with theory.

Image of FIG. 4.
FIG. 4.

Kavandi plots of stationary PrSBeads within the square syringe for three separate runs.

Image of FIG. 5.
FIG. 5.

Combined Kavandi plot of stationary PrSBeads in the square syringe subjected to varying pressures in 10.5% and 21% .

Image of FIG. 6.
FIG. 6.

Raw images of airborne PrSBeads as the plunger is pulled out from right to left, from (left). These velocity pairs were used to calculate velocity distributions over the field, shown in the center. Calculated pressure fields from airborne PrSBeads are shown on the right.

Image of FIG. 7.
FIG. 7.

Raw images of airborne PrSBeads as the plunger is pulled out from right to left, from (left). These velocity pairs were used to calculate velocity distributions over the field, shown in the center. Calculated pressure fields from airborne PrSBeads are shown on the right.

Image of FIG. 8.
FIG. 8.

Raw images of airborne PrSBeads as the plunger is pushed in from right to left, from (left). These velocity pairs were used to calculate velocity distributions over the field, shown in the center. Calculated pressure fields from airborne PrSBeads are shown on the right.

Image of FIG. 9.
FIG. 9.

Raw images of airborne PrSBeads as the plunger is pushed in from right to left, from (left). These velocity pairs were used to calculate velocity distribution over the field, shown in the center. Calculated pressure fields from airborne PrSBeads are shown on the right.

Tables

Generic image for table
Table I.

Calculated lifetimes for flowing and settling airborne PrSBeads.

Generic image for table
Table II.

Pressure resolutions for airborne PrSBeads at varying oxygen concentrations and interrogation window sizes.

Generic image for table
Table III.

Pressure transducer and airborne PrSBeads ratios for the frame pairs in Figs. 6 and 7.

Generic image for table
Table IV.

Pressure transducer and airborne PrSBeads ratios for the frame pairs in Figs. 8 and 9.

Loading

Article metrics loading...

/content/aip/journal/rsi/81/6/10.1063/1.3422324
2010-06-04
2014-04-19
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Simultaneous velocity and pressure measurements using luminescent microspheres
http://aip.metastore.ingenta.com/content/aip/journal/rsi/81/6/10.1063/1.3422324
10.1063/1.3422324
SEARCH_EXPAND_ITEM