No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Steady heat conduction-based thermal conductivity measurement of single walled carbon nanotubes thin film using a micropipette thermal sensor
5. D. J. Yang, Q. Zhang, G. Chen, S. F. Yoon, J. Ahn, S. G. Wang, Q. Zhou, Q. Wang, and J. Q. Li, Phys. Rev. B 66, 165440 (2002).
12. M. S. Watanabe, N. Kakuta, K. Mabuchi, and Y. Yamada, “Micro-thermocouple probe for measurement of cellular thermal responses,” in Proceedings of the 27th Annual Conference of the IEEE-EMB (IEEE, Shanghai, China, 2005), pp. 4858–4861.
13. A. Mubarak, E. Hamzah, and M. R. M. Toft, Jurnal Mekanikal 20, 42 (2005).
16. J. P. Holman, Experimental Methods for Engineers (McGraw Hill, New York, 1994).
17. A. F. Mills, Heat and Mass Transfer (CRC, California, 1995).
18. H. S. Jaeger, Conduction of Heat in Solids (Oxford University Press, New York, 1986).
Article metrics loading...
In this paper, we describe the thermal conductivity measurement of single-walled carbon nanotubes thin film using a laser point source-based steady state heat conduction method. A high precision micropipette thermal sensor fabricated with a sensing tip size varying from 2 μm to 5 μm and capable of measuring thermal fluctuation with resolution of ±0.01 K was used to measure the temperature gradient across the suspended carbon nanotubes (CNT) film with a thickness of 100 nm. We used a steady heat conduction model to correlate the temperature gradient to the thermal conductivity of the film. We measured the average thermal conductivity of CNT film as 74.3 ± 7.9 W m−1 K−1 at room temperature.
Full text loading...
Most read this month