banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The energy transfer in the TEMP-4M pulsed ion beam accelerator
Rent this article for
View: Figures


Image of FIG. 1.
FIG. 1.

Waveforms of the accelerating voltage (1) and diode impedance strip focusing (2) and planar (3) diodes.

Image of FIG. 2.
FIG. 2.

The schematic of the TEMP-4M accelerator: gas-filled spark gaps (1, 4); ohmic-capacitive dividers (2, 5); Blumlein line (3); Rogowski coil (6); potential electrode of diode (7); diode chamber (8); target (9); vacuum pump (10); Marx generator (11); charging inductor used for single pulse mode only ( ); and charging inductor used for double pulse mode only ( ).

Image of FIG. 3.
FIG. 3.

Energy delivered to the load without charging inductor, second pulse and after-pulses (1); without charging inductor, second pulse only (2); with charging inductor, second pulse only, in both double pulse and single pulse mode (3).

Image of FIG. 4.
FIG. 4.

Energy transferred from Blumlein to diode: second pulse and after-pulses (1); second pulse only (2).

Image of FIG. 5.
FIG. 5.

The dependence of the energy dissipated in the Blumlein on the energy transmitted from Marx to Blumlein: with resistive load (1) and with the strip focusing diode or strip planar diode (2).

Image of FIG. 6.
FIG. 6.

The dependence of energy of extracted beam on the energy supplied to the diode (for various diodes): spiral diode (1); strip focusing diode (2); strip planar diode (3); and calculated efficiency without magnetic insulation using Child-Langmuir law for ions (4).


Article metrics loading...


Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: The energy transfer in the TEMP-4M pulsed ion beam accelerator