No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Ion sources for ion implantation technology (invited)a)
2. K. Tanaka, S. Umisedo, K. Miyabayashi, H. Fujita, T. Kinoyama, N. Hamamoto, T. Yamashita, and M. Tanjyo, AIP Conf. Proc. 866, 421 (2006).
3. T. Aoyama, M. Fukuda, Y. Nara, S. Umisedo, N. Hamamoto, T. Nagayama, and M. Tanjyo, in Proceedings of the 5th International Workshop on Junction Technology (IEEE, 2005), p. 27.
4. S. Umisedo, N. Hamamoto, S. Sakai, M. Tanjyo, N. Nagai, and M. Naito, in Proceedings of the 4th International Workshop on Junction Technology (IEEE, 2004), p. 95.
5. W. Krull, Insight 2007, 189.
6. S. Sakai, N. Hamamoto, Y. Nakajima, and H. Onoda, in Proceedings of the 13th International Workshop on Junction Technology (IEEE, 2013), p. 26.
8. Y. Inouchi, T. Matsumoto, S. Dohi, M. Tanii, G. Takahashi, K. Imai, I. Nishimura, J. Tatemichi, M. Konishi, and M. Naito, AIP Conf. Proc. 1496, 328 (2012).
Article metrics loading...
Ion sources for ion implantation are introduced. The technique is applied not only to large scale integration (LSI) devices but also to flat panel display. For LSI fabrication, ion source scheduled maintenance cycle is most important. For CMOS image sensor devices, metal contamination at implanted wafer is most important. On the other hand, to fabricate miniaturized devices, cluster ion implantation has been proposed to make shallow PN junction. While for power devices such as silicon carbide, aluminum ion is required. For doping processes of LCD fabrication, a large ion source is required. The extraction area is about 150 cm × 10 cm, and the beam uniformity is important as well as the total target beam current.
Full text loading...
Most read this month