Skip to main content
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
/content/aip/journal/rsi/87/11/10.1063/1.4961077
1.
V. Toigo, D. Boilson, T. Bonicelli, R. Piovan, M. Hanada, A. Chakraborty et al., Nucl. Fusion 55, 083025 (2015).
http://dx.doi.org/10.1088/0029-5515/55/8/083025
2.
R. Pasqualotto, G. Serianni, P. Sonato, M. Agostini et al., Rev. Sci. Instrum. 83, 02B103 (2012).
http://dx.doi.org/10.1063/1.3662017
3.
M. Brombin, M. Boldrin, M. Dalla Palma, R. Ghiraldelli, F. Molon, N. Pomaro, G. Serianni, and R. Pasqualotto, IEEE Trans. Plasma Sci. 40, 724 (2012).
http://dx.doi.org/10.1109/TPS.2011.2181957
4.
M. Zaupa, M. Dalla Palma, E. Sartori, M. Brombin, and R. Pasqualotto, Rev. Sci. Instrum. 87, 11D415 (2016).
http://dx.doi.org/10.1063/1.4958906
5.
M. Brombin, R. Ghiraldelli, F. Molon, G. Serianni, and R. Pasqualotto, IEEE Trans. Plasma Sci. PP, 1 (2016).
http://dx.doi.org/10.1109/TPS.2016.2564739
http://aip.metastore.ingenta.com/content/aip/journal/rsi/87/11/10.1063/1.4961077
Loading
/content/aip/journal/rsi/87/11/10.1063/1.4961077
Loading

Data & Media loading...

Loading

Article metrics loading...

/content/aip/journal/rsi/87/11/10.1063/1.4961077
2016-08-29
2016-09-25

Abstract

The prototype radio frequency source of the ITER heating neutral beams will be first tested in SPIDER test facility to optimize H production, cesium dynamics, and overall plasma characteristics. Several diagnostics will allow to fully characterise the beam in terms of uniformity and divergence and the source, besides supporting a safe and controlled operation. In particular, thermal measurements will be used for beam monitoring and system protection. SPIDER will be instrumented with mineral insulated cable thermocouples, both on the grids, on other components of the beam source, and on the rear side of the beam dump water cooled elements. This paper deals with the final design and the technical specification of the thermal sensor diagnostic for SPIDER. In particular the layout of the diagnostic, together with the sensors distribution in the different components, the cables routing and the conditioning and acquisition cubicles are described.

Loading

Full text loading...

/deliver/fulltext/aip/journal/rsi/87/11/1.4961077.html;jsessionid=C3TLj2Xa8onXLel4g0IhVBJC.x-aip-live-06?itemId=/content/aip/journal/rsi/87/11/10.1063/1.4961077&mimeType=html&fmt=ahah&containerItemId=content/aip/journal/rsi
true
true

Access Key

  • FFree Content
  • OAOpen Access Content
  • SSubscribed Content
  • TFree Trial Content
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
/content/realmedia?fmt=ahah&adPositionList=
&advertTargetUrl=//oascentral.aip.org/RealMedia/ads/&sitePageValue=rsi.aip.org/87/11/10.1063/1.4961077&pageURL=http://scitation.aip.org/content/aip/journal/rsi/87/11/10.1063/1.4961077'
Right1,Right2,Right3,