- Conference date: 3–4 October 2011
- Location: Melaka, Malaysia
Dynamic stall has been widely known to significantly affect the performance of the wind turbines. In this paper, aerodynamic simulation of the unsteady low-speed flow past two-dimensional wind turbine blade profiles, developed by the National Renewable Energy Laboratory (NREL), will be performed. The aerodynamic simulation will be performed using Computational Fluid Dynamics (CFD). The governing equations used in the simulations are the Unsteady-Reynolds-Averaged-Navier-Stokes (URANS) equations. The unsteady separated turbulent flow around an oscillating airfoil pitching in a sinusoidal pattern in the regime of low Reynolds number is investigated numerically. The investigation employs the URANS approach with the most suitable turbulence model. The development of the light dynamic stall of the blades under consideration is studied. The S809 blade profile is simulated at different mean wind speeds. Moreover, the S826 blade profile is also considered for analysis of wind turbine blade which is the most suitable blade profile for the wind conditions in Egypt over the site of Gulf of El-Zayt. In order to find the best oscillating frequency, different oscillating frequencies are studied. The best frequency can then be used for the blade pitch controller. The comparisons with the experimental results showed that the used CFD code can accurately predict the blade profile unsteady aerodynamic loads.
Data & Media loading...
Article metrics loading...