- Conference date: 30–31 July 2013
- Location: Zlin, Czech Republic
When molten plastic is extruded from a die, it sometimes collects on the open face of the die. Known as die drool, this phenomenon costs plastics manufacturers by requiring die cleaning. This has been attributed to many causes, but none of these has led to an equation for the drool rate. In this work we provide an exact analytical solution for the drool rate, and we base this solution on a postulate of a cohesive slip layer near the die walls. We thus attribute die drool to cohesive failure within the fluid at an internal surface where the fluid slips on itself. We adimensionalize the drool rate with the production rate, and call this the build up ratio, BR. We provide an exact analytical solution for BR when the cohesive slip layer either sticks at the wall. We examine the slit geometry corresponding to sheet or film extrusion.
MOST READ THIS MONTH
MOST CITED THIS MONTH
Article metrics loading...