Index of content:
Volume 104, Issue 1, July 1998
- TRANSDUCTION 
104(1998); http://dx.doi.org/10.1121/1.423288View Description Hide Description
Frequency-dependent acoustic center correction values are required to obtain accurate microphonecalibrations in the free-field by the reciprocity technique. These values were determined for IEC type LS2aP microphones at normal incidence by utilizing the theoretical inverse relationship between the sound pressure amplitude at the acoustic center of a receiver and the distance between acoustic centers of source and receiver. A dynamic signal analyzer was used to measure the gain factor between the amplified output voltage of the receiver and the source input voltage at 500-Hz intervals in the extended frequency range 2–50 kHz. This procedure allowed all the data for a microphone pair to be gathered within several hours for microphone diaphragm separations from 101–311 mm at 10-mm intervals. At each frequency, the reciprocal of this gain factor as a function of microphone diaphragm separation was fit to a straight line after correction for atmospheric effects, including attenuation of sound caused by atmospheric absorption. Mean acoustic center correction values (from four microphones combined in six pairs) were calculated using the parameters obtained from the fit and found to be in good agreement with published values calculated by the boundary element method, as well as with values predicted by scaling published values of the acoustic center correction for microphones with a geometrical configuration similar to that of IEC type LS1P microphones.