No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
The full text of this article is not currently available.
Adaptive muffler based on controlled flow valves
4. S. M. Kuo and D. R. Morgan, Active Noise Control Systems Algorithms and DSP Implementations ( Wiley, New York, 1996).
5. J. Prezelj and M. Čudina, “ Dipole in orthogonal direction as a secondary source for active noise control in ducts,” Acta Acust. Acust. 93, 63–72 (2007).
16. D. D. Davis, G. M. Stokes, and G. L. Stevens, Jr., “ Theoretical and experimental investigation of mufflers with comments on engine-exhaust muffler design,” NACA Annual Report (Langley Aeronautical Laboratory, Langley Field, VA, 1954).
17. I. Ver and L. Beranek, Noise and Vibration Control Engineering ( John Wiley and Sons, Hoboken, NJ, 2006).
20. T. Yasuda, C. Wu, N. Nakagawa, and K. Nagamura, “ Studies on an automobile muffler with the acoustic characteristic of low-pass filter and Helmholtz resonator,” Appl. Acoust. 74, 49–57 (2013).
21. Z. L. Ji and A. Selamet, “ Boundary element analysis of three-pass perforated duct mufflers,” Noise Control Eng. J. 48, 151–156 (2000).
Article metrics loading...
An adaptive muffler with a flexible internal structure is considered. Flexibility is achieved using controlled flow valves. The proposed adaptive muffler is able to adapt to changes in engine operating conditions. It consists of a Helmholtz resonator, expansion chamber, and quarter wavelength resonator. Different combinations of the control valves' states at different operating conditions define the main working principle. To control the valve's position, an active noise control approach was used. With the proposed muffler, the transmission loss can be increased by more than 10 dB in the selected frequency range.
Full text loading...
Most read this month