1887
banner image
No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Ti surface alloying of an AISI 316L stainless steel by low energy high current pulsed electron beam treatment
Rent:
Rent this article for
USD
10.1116/1.2976566
/content/avs/journal/jvsta/26/6/10.1116/1.2976566
http://aip.metastore.ingenta.com/content/avs/journal/jvsta/26/6/10.1116/1.2976566

Figures

Image of FIG. 1.
FIG. 1.

XRD traces of the initial sample (a) and Ti alloyed samples after 10 pulses (b) and 20 pulses (c) by LEHCPEB.

Image of FIG. 2.
FIG. 2.

Typical SEM micrographs of the Ti precoated samples after the LEHCPEB treatment. (a) low magnification, 10 pulses, (b) high magnification, 10 pulses, (c) low magnification, 20 pulses, and (d) high magnification, 20 pulses.

Image of FIG. 3.
FIG. 3.

SEM images of the samples treated for 10 (a) and 20 (b) pulses observed under backscattering electron condition.

Image of FIG. 4.
FIG. 4.

Cross-section SEM micrographs of the Ti alloyed samples after 10 pulses (a) and 20 pulses (b) by LEHCPEB. The result of EDX analysis carried out in the framed area is shown inset of (b), indicating the alloyed layer is rich in Ti.

Image of FIG. 5.
FIG. 5.

Two examples of surface composition profiles of the 316L stainless steel sample alloyed by LEHCPEB for ten pulses measured by SNMS.

Image of FIG. 6.
FIG. 6.

Two examples of surface composition profiles of the 316L stainless steel sample alloyed by LEHCPEB for 20 pulses measured by SNMS.

Image of FIG. 7.
FIG. 7.

SEM image of the sample treated for 20 pulses observed under backscattering electron condition, showing crater eruptions and the heterogeneous composition.

Image of FIG. 8.
FIG. 8.

Potentiodynamic curves of the sample untreated 5, 10, and 20 pulsed samples without Ti alloying in Tyrode’s simulated body fluid (a). Potentiodynamic curves of the untreated sample, 10 pulsed sample without alloying, 10 and 20 pulse Ti alloyed samples in Tyrode’s simulated body fluid (b).

Tables

Generic image for table
TABLE I.

The corrosion data of the untreated, LEHCPEB treated, and Ti alloyed 316L samples.

Loading

Article metrics loading...

/content/avs/journal/jvsta/26/6/10.1116/1.2976566
2008-10-30
2014-04-16
Loading

Full text loading...

This is a required field
Please enter a valid email address
752b84549af89a08dbdd7fdb8b9568b5 journal.articlezxybnytfddd
Scitation: Ti surface alloying of an AISI 316L stainless steel by low energy high current pulsed electron beam treatment
http://aip.metastore.ingenta.com/content/avs/journal/jvsta/26/6/10.1116/1.2976566
10.1116/1.2976566
SEARCH_EXPAND_ITEM