No data available.
Please log in to see this content.
You have no subscription access to this content.
No metrics data to plot.
The attempt to load metrics for this article has failed.
The attempt to plot a graph for these metrics has failed.
Corrosion resistance of laser-fabricated metal–matrix composite layer on stainless steel 316L
1.W. J. Tomlinson and M. G. Talks, “Shot peening, laser surface melting and the cavitation erosion of an austenitic grey iron,” J. Mater. Sci. 26, 804–808 (1991).
2.C. T. Kwok, H. C. Man, and F. T. Cheng, “Cavitation erosion and pitting corrosion of laser surface melted stainless steels,” Surf. Coat. Technol. 99, 295–304 (1998).
3.H. Hiraga, T. Inoue, H. Shimura, and A. Matsunawa, “Cavitation erosion mechanism of NiTi coatings made by laser plasma hybrid spraying,” Wear 231, 272–278 (1999).
4.C. T. Kwok, F. T. Cheng, and H. C. Man, “Laser surface modification of UNS S31603 stainless steel using NiCrSiB alloy for enhancing cavitation erosion resistance,” Surf. Coat. Technol. 107, 31–40 (1998).
5.J. M. Robinson, S. Anderson, R. D. Knutsen, and R. C. Reed, “Cavitation erosion of laser melted and laser nitrided Ti-6Al-4V,” Mater. Sci. Technol. 11, 611–618 (1995).
6.C. V. Hyatt, K. H. Magee, and T. Betancourt, “The effect of heat input on the microstructure and properties of nickel aluminum bronze laser clad with a consumable of composition Cu-9.0Al-4.6Ni-3.9Fe-1.2Mn,” Met., Mater. Trans. A 29A, 1677–1690 (1998).
7.F. T. Cheng, C. T. Kwok, and H. C. Man, “Laser surfacing of S31603 stainless steel with engineering ceramics for cavitation erosion resistance,” Surf. Coat. Technol. 139, 14–24 (2001).
8.F. T. Cheng, C. T. Kwok, and H. C. Man, “Cavitation erosion resistance of stainless steel laser-clad with WC-reinforced MMC,” Mater. Lett. (submitted).
9.D. Schuocker, High Power Lasers in Production Engineering (Imperial College Press, London, 1999), p. 183.
10.ASTM Standard G61-86, “Standard method for conducting cyclic potentiodynamic polarization measurements for localized corrosion susceptibility of iron-, nickel-, or cobalt-based alloys,” Annual Book of ASTM Standards (ASTM, Philadelphia, PA, 1992), Vol. 03.02.
11.R. C. Gassmann, “Laser cladding with and composites for enhanced abrasive wear resistance,” Mater. Sci. Technol. 12, 691–696 (1996).
12.J. Feng, M. G. S. Ferreira, and R. Vilar, “Laser cladding of composite coatings on AISI 304 stainless steel,” Surf. Coat. Technol. 88, 212–218 (1997).
13.F. Laroudie, C. Tassin, and M. Pons, “Hardening of 316L stainless steel by laser surface alloying,” J. Mater. Sci. 30, 3652–3657 (1995).
14.G. Sharfirstein, S. Airely, M. Bamberger, F. Maisenhalder, and M. Langohr, “Modelling of and solidification behaviour during laser surface alloying of ferrous alloys with ” Mater. Sci. Technol. 10, 837–840 (1994).
15.M. G. Fontana, Corrosion Engineering (McGraw–Hill, New York, 1987).
16.P. R. Trzastoma, Corrosion in Metal Matrix Composites: Mechanisms and Properties, edited by R. K. Everett and R. J. Arsenault (Academic, CA, 1991), pp. 383–403.
Article metrics loading...
Full text loading...
Most read this month