Directional adhesion of gecko-inspired angled microfiber arrays
Appl. Phys. Lett. 93, 191910 (2008); doi:10.1063/1.3006334
Published 13 November 2008
You are not logged in to this journal. Log in
Arrays of angled microfibers with a gecko-inspired structure were fabricated from a stiff thermoplastic polymer (polypropylene) with elastic properties similar to those of
-keratin of natural setae. Friction experiments demonstrated that this fibrillar polymer surface exhibits directional adhesion. Sliding of clean glass surfaces against and along the microfiber direction without applying an external normal force produced an apparent shear stress of 0.1 and 4.5 N/cm2, respectively. This directional adhesion is interpreted in the context of a nonlinear elastic bending model of an angled beam. Shearing and normal contact experiments yielded further evidence of the anisotropic adhesion of the fibrillar polymer and revealed the occurrence of a pull-off (adhesive) force at the instant of surface detachment, unlike vertically aligned microfiber arrays of the same material that exhibited a zero pull-off force. The results of this study provide impetus for the design of gecko-inspired adhesives with angled structures that demonstrate directional adhesion against different material surfaces.
©2008 American Institute of Physics
-keratin of natural setae. Friction experiments demonstrated that this fibrillar polymer surface exhibits directional adhesion. Sliding of clean glass surfaces against and along the microfiber direction without applying an external normal force produced an apparent shear stress of 0.1 and 4.5 N/cm2, respectively. This directional adhesion is interpreted in the context of a nonlinear elastic bending model of an angled beam. Shearing and normal contact experiments yielded further evidence of the anisotropic adhesion of the fibrillar polymer and revealed the occurrence of a pull-off (adhesive) force at the instant of surface detachment, unlike vertically aligned microfiber arrays of the same material that exhibited a zero pull-off force. The results of this study provide impetus for the design of gecko-inspired adhesives with angled structures that demonstrate directional adhesion against different material surfaces.
©2008 American Institute of Physics
| History: | Received 3 August 2008; accepted 2 October 2008; published 13 November 2008 |
| Permalink: |
http://link.aip.org/link/?APPLAB/93/191910/1 |
REFERENCES (14)
For access to fully linked references, you need to log in.
For access to fully linked references, you need to Log in.
- A. M. Peattie, C. Majidi, A. Corder, and R. J. Full,
J. R. Soc., Interface 4, 1071 (2007) . - K. Autumn, C. Majidi, R. E. Groff, A. Dittmore, and R. Fearing,
J. Exp. Biol. 209, 3558 (2006) . - K. Autumn, A. Dittmore, D. Santos, M. Spenko, and M. Cutkosky,
J. Exp. Biol. 209, 3569 (2006) . - N. Gravish, M. Wilkinson, and K. Autumn,
J. R. Soc., Interface 5, 339 (2008) . - W. R. Hansen and K. Autumn,
Proc. Natl. Acad. Sci. U.S.A. 102, 385 (2005) . - M. Sitti and R. S. Fearing,
J. Adhes. Sci. Technol. 17, 1055 (2003) . - D. Santos, M. Spenko, A. Parness, S. Kim, and M. Cutkosky,
J. Adhes. Sci. Technol. 21, 1317 (2007) . - B. Aksak, M. P. Murphy, and M. Sitti,
Langmuir 23, 3322 (2007) . - M. P. Murphy, B. Aksak, and M. Sitti,
J. Adhes. Sci. Technol. 21, 1281 (2007) . - H. Yao, G. D. Rocca, P. R. Guduru, and H. Gao,
J. R. Soc., Interface 5, 723 (2008) . - K. Autumn and N. Gravish, Philos. Trans. R. Soc. London, Ser. A 366, 1575 (2008).
- J. Lee, C. Majidi, B. Schubert, and R. S. Fearing,
J. R. Soc., Interface 5, 835 (2008) . - S. Begej,
IEEE J. Rob. Autom. 4, 472 (1988) . - B. Schubert, J. Lee, C. Majidi, and R. S. Fearing,
J. R. Soc., Interface 5, 845 (2008) .







