Adjoint Aerodynamic Design Optimization for Blades in Multistage Turbomachines—Part II: Validation and Application

You are not logged into the ASME Digital Library.
Log in

This is the second part of a two-part paper. First, the design-optimization system based on the adjoint gradient solution approach as described in Part I is introduced. Several test cases are studied for further validation and demonstration of the methodology and implementation. The base-line adjoint method as applied to realistic 3D configurations is demonstrated in the redesign of the NASA rotor 67 at a near-choke condition, leading to a 1.77% efficiency gain. The proposed adjoint mixing plane is applied to the redesign of a transonic compressor stage (DLR compressor stage) and an IGV-rotor-stator configuration of a Siemens industrial compressor at a single-operating point, both producing measurably positive efficiency gains. An examination on the choice of the operating mass flow condition as the basis for the performance optimization, however, highlights the limitation of the single-point approach for practical applications. For the three-row compressor configuration, a near peak-efficiency point based redesign leads to a measurable reduction in the choke mass flow, while a near-choke point based redesign leads to a significant performance drop in other flow conditions. Subsequently, a parallel multipoint approach is implemented. The results show that a two-point design optimization can produce a consistently better performance over a whole range of mass flow conditions compared with the original design. In the final case, the effectiveness of the present method and system is demonstrated by a redesign applied to a seven-row industrial compressor at the design point, leading to a remarkable 2.4% efficiency gain.

©2010 American Society of Mechanical Engineers