Previous Article
A Monte Carlo study of IMRT beamlets in inhomogeneous media
Intensity Modulated Radiation Therapy (IMRT) has trended toward smaller multiple radiation fields thereby increasing the resolution of the intensity map. Vendors have introduced multileaf collimators ...
Next Article
Automatic quantitative low contrast analysis of digital chest phantom radiographs
Up to the present, the majority of low contrast object evaluations performed on phantom images have been accomplished in a subjective fashion. This is mainly due to the time and effort required to man...

You are not logged in to this journal. Log in

A virtual photon energy fluence model for Monte Carlo dose calculation

Med. Phys. Volume 30, Issue 3, pp. 301-311 (March 2003)

Published 5 February 2003
Buy This PDF   (US$28)
Download HTML Download Sectioned HTML Download PDF (158 kB) View Cart

KEYWORDS and PACS

Keywords
PACS
  • 87.53.Wz
    Monte Carlo applications (ionizing radiation therapy)
  • YEAR: 2003

PUBLICATION DATA

ISSN:
0094-2405 (print)  
Publisher:
AIP is a member of CrossRef AAPM
Matthias Fippel, Freddy Haryanto, Oliver Dohm, and Fridtjof Nüsslin
Abteilung für Medizinische Physik, Universitätsklinikum Tübingen, Hoppe-Seyler-Strasse 3, 72076 Tübingen, Germany

Stephan Kriesen
Klinik und Poliklinik für Strahlentherapie, Universität Rostock, Südring 75, 18059 Rostock, Germany
The presented virtual energy fluence (VEF) model of the patient-independent part of the medical linear accelerator heads, consists of two Gaussian-shaped photon sources and one uniform electron source. The planar photon sources are located close to the bremsstrahlung target (primary source) and to the flattening filter (secondary source), respectively. The electron contamination source is located in the plane defining the lower end of the filter. The standard deviations or widths and the relative weights of each source are free parameters. Five other parameters correct for fluence variations, i.e., the horn or central depression effect. If these parameters and the field widths in the X and Y directions are given, the corresponding energy fluence distribution can be calculated analytically and compared to measured dose distributions in air. This provides a method of fitting the free parameters using the measurements for various square and rectangular fields and a fixed number of monitor units. The next step in generating the whole set of base data is to calculate monoenergetic central axis depth dose distributions in water which are used to derive the energy spectrum by deconvolving the measured depth dose curves. This spectrum is also corrected to take the off-axis softening into account. The VEF model is implemented together with geometry modules for the patient specific part of the treatment head (jaws, multileaf collimator) into the XVMC dose calculation engine. The implementation into other Monte Carlo codes is possible based on the information in this paper. Experiments are performed to verify the model by comparing measured and calculated dose distributions and output factors in water. It is demonstrated that open photon beams of linear accelerators from two different vendors are accurately simulated using the VEF model. The commissioning procedure of the VEF model is clinically feasible because it is based on standard measurements in air and water. It is also useful for IMRT applications because a full Monte Carlo simulation of the treatment head would be too time-consuming for many small fields. ©2003 American Association of Physicists in Medicine.
History: Received 30 May 2002; accepted 11 December 2002; published 5 February 2003
Permalink: http://dx.doi.org/10.1118/1.1543152

REFERENCES (42)

For access to fully linked references, you need to log in. For access to fully linked references, you need to Log in.

CITING ARTICLES

For access to citing articles, you need to log in.
For access to citing articles, you need to Log in.