Previous Article
Film dosimetry in the peripheral region using multiple sensitometric curves
We present a method for applying film dosimetry to the peripheral region utilizing multiple sensitometric curves. There are many instances when the dose to the peripheral region outside the field edge...
Next Article
Verification of treatment parameter transfer by means of electronic portal dosimetry
Electronic portal imaging devices (EPIDs) are mainly used for patient setup verification during treatment but other geometric properties like block shape and leaf positions are also determined. Electr...

You are not logged in to this journal. Log in

4D-CT imaging of a volume influenced by respiratory motion on multi-slice CT

Med. Phys. Volume 31, Issue 2, pp. 333-340 (February 2004)

Published 26 January 2004
Buy This PDF   (US$28)
Download HTML Download Sectioned HTML Download PDF (905 kB) View Cart

KEYWORDS and PACS

Keywords
PACS
  • 87.59.Fm
    Computed tomography (CT) (medical imaging)
  • 87.19.Uv
    Haemodynamics, pneumodynamics
  • YEAR: 2004

RELATED DATABASES


To view database links for this article,
you need to log in.
To view database links for this article,
you need to log in.

PUBLICATION DATA

ISSN:
0094-2405 (print)  
Publisher:
AIP is a member of CrossRef AAPM
Tinsu Pan
GE Medical Systems, Waukesha, Wisconsin

Ting-Yim Lee
The University of Western Ontario, London, Ontario, Canada

Eike Rietzel and George T. Y. Chen
Massachusetts General Hospital, Boston, Massachusetts
We propose a new scanning protocol for generating 4D-CT image data sets influenced by respiratory motion. A cine scanning protocol is used during data acquisition, and two registration methods are used to sort images into temporal phases. A volume is imaged in multiple acquisitions of 1 or 2 cm length along the cranial-caudal direction. In each acquisition, the scans are continuously acquired for a time interval greater than or equal to the average respiratory cycle plus the duration of the data for an image reconstruction. The x ray is turned off during CT table translation and the acquisition is repeated until the prescribed volume is completely scanned. The scanning for 20 cm coverage takes about 1 min with an eight-slice CT or 2 mins with a four-slice CT. After data acquisition, the CT data are registered into respiratory phases based on either an internal anatomical match or an external respiratory signal. The internal approach registers the data according to correlation of anatomy in the CT images between two adjacent locations in consecutive respiratory cycles. We have demonstrated the technique with ROIs placed in the region of diaphragm. The external approach registers the image data according to an externally recorded respiratory signal generated by the Real-Time Position Management (RPM) Respiratory Gating System (Varian Medical Systems, Palo Alto, CA). Compared with previously reported prospective or retrospective imaging of the respiratory motion with a single-slice or multi-slice CT, the 4D-CT method proposed here provides (1) a shorter scan time of three to six times faster than the single-slice CT with prospective gating; (2) a shorter scan time of two to four times improvement over a previously reported multi-slice CT implementation, and (3) images over all phases of a breathing cycle. We have applied the scanning and registration methods on phantom, animal and patients, and initial results suggest the applicability of both the scanning and the registration methods. ©2004 American Association of Physicists in Medicine.
History: Received 7 August 2003; revised 18 November 2003; accepted 19 November 2003; published 26 January 2004
Permalink: http://dx.doi.org/10.1118/1.1639993

REFERENCES (18)

For access to fully linked references, you need to log in. For access to fully linked references, you need to Log in.

CITING ARTICLES

For access to citing articles, you need to log in.
For access to citing articles, you need to Log in.