Successive large perturbation method for the elimination of initial value dependence in I-V curve fitting
Rev. Sci. Instrum. 80, 115111 (2009); doi:10.1063/1.3264083
Published 20 November 2009
You are not logged in to this journal. Log in
A successive large perturbation method (SLPM) is proposed to resolve the problem of initial value dependence in the numerical least-square fitting for the extraction of I-V parameters in solar cells. In this method a large perturbation is applied onto certain a parameter before next turn of Newton-like iteration is proceeded and an improved result is usually obtained if the I-V parameters suffer from a latent initial value dependence problem. The numerical insensitivity of mean square of deviation to the variation of large shunt resistance is a critical factor to cause the initial value dependence. An application example for a dye-sensitized solar cell shows that about a 60% change of reverse saturation current I0 occurs after SLPM is applied to the result obtained by Newton-like method. Our result demonstrates that SLPM is a powerful tool to eliminate the initial value dependence in I-V curve fitting.
©2009 American Institute of Physics
| History: | Received 1 October 2009; accepted 26 October 2009; published 20 November 2009 |
| Permalink: |
http://link.aip.org/link/?RSINAK/80/115111/1 |
REFERENCES (16)
For access to fully linked references, you need to log in.
For access to fully linked references, you need to Log in.
- S. M. Sze and K. K. Ng, Physics of Semiconductor Devices, 3rd ed. (Wiley, New York, 2007), Chaps. 2 and 13.
- M. Murayama and T. Mori,
Thin Solid Films 509, 123 (2006) -
Jpn. J. Appl. Phys., Part 1 45, 542 (2006) . - K. I. Ishibashi, Y. Kimura, and M. Niwano, J. Appl. Phys. 103, 094507 (2008).
- L. Y. Han, N. Koide, Y. Chiba, and T. Mitate, Appl. Phys. Lett. 84, 2433 (2004).
- L. Y. Han, N. Koide, Y. Chiba, A. Isram, R. Komiya, N. Fuke, A. Fukui, and R. Yamanaka, Appl. Phys. Lett. 86, 213501 (2005).
- N. Satoh, T. Nakashima, and K. Yamamoto,
J. Am. Chem. Soc. 127, 13030 (2005) . - A. Polman, W. G. J. H. M. Van Sark, W. Sinke, and F. W. Saris,
Sol. Cells 17, 241 (1986) . - S. K. Datta, K. Mukhopadhyay, S. Bandopadhyay, and H. Saha,
Solid-State Electron. 35, 1667 (1992) . - M. Haouari-Merbah, M. Belhamel, I. Tobías, and J. M. Ruiz,
Sol. Energy Mater. Sol. Cells 87, 225 (2005) . - A. Ortiz-Conde, F. J. G. Sánchez, and J. Muci,
Sol. Energy Mater. Sol. Cells 90, 352 (2006) . - W. H. Press, S. A. Teukolsky, W. T. Wetterling, and B. P. Flannery, Numerical Recipes in C++, 3rd ed. (Cambridge University Press, Cambridge, England, 2007), Chap. 15.
- T. Easwarakhanthan, J. Bottin, I. Bouhouch, and C. Boutrit,
Int. J. Sol. Energy 4, 1 (1986) . - M. Chegaar, Z. Quennoughi, and A. Hoffmann,
Solid-State Electron. 45, 293 (2001) . - In this paper, a dampling factor is dynamically changed among three discrete values as 0.001, 0.01, and 0.1.
- S. Soedergren, A. Hagfeldt, J. Olsson, and S. -E. Lindquist,
J. Phys. Chem. 98, 5552 (1994) . - S. Y. Huang, G. Schlichthörl, A. J. Nozik, M. Grätzel, and A. J. Frank,
J. Phys. Chem. 101, 2576 (1997) .







