Journal of Architectural Engineering

Accelerations of Nonstructural Components during Nonlinear Seismic Response of Multistory Structures

Andres Lepage, Jared M. Shoemaker, and Ali M. Memari
A simple method is presented for determining the peak horizontal acceleration of nonstructural components attached to the floor system of multistory structures subjected to strong ground motions. The procedure is developed for nonstructural components based on shake-table data measured on the floor ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000087] posted Sat Feb 11, 2012.

Roman Concrete Vaulting in the Great Hall of Trajan's Markets: A Structural Evaluation

Philip Brune and Renato Perucchio
We use an in-depth structural analysis to explore the design and functionality of the Great Hall of Trajan's Markets (110CE), a large Imperial monument cross-vaulted in un-reinforced Roman concrete. Following a combined approach, the analysis utilizes both field quantities and aggregate equilibrium ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000086] posted Sat Feb 11, 2012.

Experimental Investigation of Numerical Design Method for Point Supported Glass

Joshua Schultz, Douglas Stahl, and Christian Stutzki
Calculating stresses in structural glass components is essential for design, but is especially complex for customized components like point supported glass (PSG) balustrades. Stress concentrations are introduced at the discontinuities of the plates precisely where boundary conditions elicit maximum ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000066] posted Wed Jan 25, 2012.

Addressing the Housing Challenges of an Aging Population: Initiatives by Blueroof Technologies in McKeesport, Pennsylvania

Richard Behr, Mark Sciegaj, Robert Walters, John Bertoty, and Rachel Dungan
Accommodating the preference of the growing elderly population to age independently, at home and in the community, requires innovative and cost-effective neighborhood retrofit plans. Retrofitting existing homes and infilling available neighborhood land parcels with smart homes, equipped with technol ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000033] published Fri Jan 13, 2012.

Off-Site Construction in Saudi Arabia: The Way Forward

Hani Aburas
Abstract not available. [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000048] published Fri Jan 13, 2012.

Modeling System Effects and Structural Load Paths in a Wood-Framed Structure

Kenneth G. Martin, Rakesh Gupta, David O. Prevatt, Peter L. Datin, and John W. van de Lindt
The objective of this project was to evaluate system effects and further define load paths within a light-frame wood structure under extreme wind events. The three-dimensional 30- by 40-ft (9.1- by 12.2-m) building, designed to be representative of typical light-frame wood construction in the southe ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000045] published Fri Jan 13, 2012.

Performance of Helical Disk Ground Anchors for Anchorage of Manufactured Housing

Jay H. Crandell, R. A. William Zoeller, Mark Nowak, and Mike Blanford
The performance of conventional (helical disk) ground anchors is important to the overall quality and safety of manufactured home installations and other applications requiring anchorage to ground. This paper presents findings from an investigation of the performance of conventional ground anchors a ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000015] published Fri Jan 13, 2012.

Special Issue on Residential Construction

Bohumil Kasal
Abstract not available. [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000051] published Fri Jan 13, 2012.

Reviewers

Abstract not available. [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000065] published Fri Jan 13, 2012.

Wind-Uplift Capacity of Residential Wood Roof-Sheathing Panels Retrofitted with Insulating Foam Adhesive

Peter L. Datin, David O. Prevatt, and Weichiang Pang
This research evaluated and compared the wind-uplift capacity of wood roof-sheathing panels fabricated by using nails with retrofitted roof panels made with nails and closed-cell sprayed polyurethane foam (ccSPF) adhesive. In hurricane-prone areas, structural retrofits of light-framed wood roof stru ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000034] published Fri Jan 13, 2012.

Lean Homebuilding: Lessons Learned from a Precast Concrete Panelizer

Isabelina Nahmens and Michael A. Mullens
This paper serves as a resource to prefabricated construction managers who are attempting to implement lean thinking to improve their production operations by eliminating waste. Lean is both a general way of thinking and a specific production management approach that emphasizes using less of everyth ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000037] published Fri Jan 13, 2012.

The Influence of Negative Phase Loading on Cable Net Facade Response

Martien Teich, Paul Warnstedt, and Norbert Gebbeken
The behavior of cable net facades subjected to blast loads differs significantly from the behavior of stiffer structures such as post-and-rail facades or classical concrete or steel structures. The low eigen frequencies and the relatively small specific weight of cable net facades cause larger defor ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000083] posted Wed Dec 14, 2011.

Case Study of Occupant Costs in Roof Management

Donald P. Coffelt, Jr. and Chris T. Hendrickson
A failed or failing roof system represents a heightened opportunity for failure in the building envelope and inherently increases the risk of additional costs. A leaking roof system also imposes costs on building occupants. Present roof asset management practice typically ignores user or occupant co ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000080] posted Fri Nov 18, 2011.

Missile Impact Resistance of Metal Mesh Roofing System

Michelle Rambo-Roddenberry, Primus V. Mtenga, and Kenneth K. Walsh
This paper presents the results of impact tests on a roof system constructed with expanded metal mesh welded to a steel frame. The roof system was designed to be installed on a masonry structure that will protect an emergency power generator at a special-needs hurricane shelter during 110 mph winds. ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000079] posted Fri Nov 18, 2011.

Maintenance Integrated Design and Manufacture of Buildings: Towards a Sustainable Model

Brian Wood
There are many elements to the manufacture and pre-assembly of building components offsite. Maintenance has long been regarded as a `Cinderella' activity. By comparison with the attention given to `sexy' new-build construction, and its design, little heed is given to the anticipation and organisatio ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000077] posted Mon Oct 24, 2011.

Adaptable Industrial Building System: A Construction Industry Perspective

Nasibeh Sadafi, M. F. M. Zain, and M. Jamil
Abstract not available. [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000075] posted Mon Oct 17, 2011.

Developing a Simple Damage Model for the Long-Term Durability of Acrylic Foam Structural Glazing Tape Subject to Sustained Wind Loading

Benjamin W. Townsend, Donatus C. Ohanehi, David A. Dillard, Steven R. Austin, Fay Salmon et al.
This article presents a simple linear damage accumulation model that may have applicability for predicting damage from sustained winds in double-sided acrylic foam tape used to attach curtain wall glazing panels to buildings. The purpose of this model is to investigate the possible cumulative effect ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000070] posted Sat Sep 10, 2011.

Global Weights of Parameters for Sustainable Buildings from Consultants' Perspectives in Indian Context

Rajiv Bhatt and J. E. M. Macwan
`Sustainable Building' (SB) and its `Assessment Schemes' are the key to achieve the sustainable growth of the urban zone. An attempt is made to develop Sustainability Global Weights (lambda) of various parameters for the assessment of Sustainable Buildings. Analytic Hierarchy Process (AHP) is used t ... [Journal of Architectural Engineering doi:10.1061/(ASCE)AE.1943-5568.0000069] posted Sat Sep 10, 2011.

Measuring and Improving Rationale Clarity in a University Office Building Design Process

John Riker Haymaker, John Marvin Chachere, and Reid Robert Senescu
This paper measures and improves the clarity of design rationale on an architecture, engineering, and construction (AEC) project and observes the effects. The rationale clarity framework (RCF) defines decisions in terms of components of rationalemanagers, stakeholders, designers, gatekeepers, object ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000041] published Fri Sep 9, 2011.

Outstanding Paper of the Year for 2010

Paul Seaburg
Abstract not available. [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000040] published Fri Sep 9, 2011.

Framework for Measuring the Rationale Clarity of AEC Design Decisions

John Marvin Chachere and John Riker Haymaker
Current architecture, engineering, and construction (AEC) design processes often rely on precedent to resolve complex decisions. However, changes to stakeholder concerns, design methods, and building products devalue much of this precedent knowledge. Project teams need to clearly communicate their d ... [J. Archit. Eng. doi:10.1061/(ASCE)AE.1943-5568.0000036] published Fri Sep 9, 2011.